Please wait

Your message is being sent

An error occurred

Cuvettes, PMMA | Description: Rectangular cuvette, Path length mm: 50
Cuvettes, PMMA | Description: Rectangular cuvette, Path length mm: 50
Brand: HACH LANGE GmbHAvailable in 2 variantsCuvettes made of PMMA for colour measurement of liquids.
€140,00
Cylindrical Cells for polarimetric measurements, UV-range | Type: macro, Path length mm: 100, Capacity µl: 28000
Cylindrical Cells for polarimetric measurements, UV-range | Type: macro, Path length mm: 100, Capacity µl: 28000
Brand: Hellma GmbH & Co. KGAvailable in 6 variantsWavelength: 200nm - 2500nmOptical material: Quartz glass High Performance
€249,00
Densitometer DEN-1 / DEN-1B | Type: DEN MCF STDS, Description: Set of 5 reference standards (0.5/1.0/2.0/3.0/4.0)
Densitometer DEN-1 / DEN-1B | Type: DEN MCF STDS, Description: Set of 5 reference standards (0.5/1.0/2.0/3.0/4.0)
Brand: Grant Instruments Ltd.Available in 3 variantsCompact and efficient benchtop densitometers for measuring turbidity of cell suspensions in a variety of life science applications. The densitometers are designed and factory calibrated to measure turbidity in the range of 0.3 to >7.5 McFarland units (DEN-1) 0.00 to >15.00 McFarland units (DEN-1B) with a small standard deviation.
€392,00
Densitometer DEN-600 | Type: DEN-600, Wavelength nm: 600 ± 10, Dimensions (W x D x H) mm: 120 x 145 x 65
Densitometer DEN-600 | Type: DEN-600, Wavelength nm: 600 ± 10, Dimensions (W x D x H) mm: 120 x 145 x 65
Brand: Grant Instruments Ltd.Portable densitometer for OD600 method, McFarland (McF) turbidity method measurement and Bradford protein assay method for protein concentration.LCD displayBattery mode possibleSoftware for measurement, results, upload and analysis (USB connectivity)Compatible with cuvettes, round bottom tubes and falcon tubes (10 mm)
€916,00
Deuterium lamp for spectrophotometer LLG-uniSPEC | Description : Deuterium lamp, For : LLG-uniSPEC 1
Deuterium lamp for spectrophotometer LLG-uniSPEC | Description : Deuterium lamp, For : LLG-uniSPEC 1
Brand: LLG LabwareAvailable in 2 variants
€460,00
Digital Refractometer/Polarimeter RePo | Type: RePo-1 Package, For: Sugar, Measuring range: -130 - +130°Z
Digital Refractometer/Polarimeter RePo | Type: RePo-1 Package, For: Sugar, Measuring range: -130 - +130°Z
Brand: ATAGO CO.,LTDAvailable in 6 variantsAll-in-One refractometer and polarimeter hybrid unit. Only 3 ml sample is needed. With the press of a button, purity, international sugar scale, specific rotation and concentration can be displayed. Users can also set an upper and lower measurement limit. An indicator light alerts the user if a measurement value is within the limits.RePo-1: can measure both brix and optical rotation of the sample.RePo-1 Package includes: Main unit, 100 ml beaker, 50 x Syringe Filters orange 45, 3 x 20 ml Syringes, 100 x Easy filter.RePo-2: As RePo-1, additionally the RePo-2 also determines and displays the amount of fructose (%) within HFCS. The RePo-2 is ideal for various industries such as food and beverage, or sugar refining.RePo-3: As RePo-1, additionally the RePo-3 also determines and displays the amount of invert sugar (%) derived from sucrose. The RePo-3 is ideal for various industries such as sugar refining.RePo-4: As RePo-1, additionally the RePo-4 also determines and displays the amount of fructose (%) and honey moisture (%). The RePo-4 is ideal for total quality control of honey.RePo-5: As RePo-1, additionally the RePo-5 can also display the refractive index (nD) of a sample. The RePo-5 is ideal for quality control in various industries such as fragrances, cosmetics, or pharmaceutical.
€1.305,59
Disposable cuvettes | Description: Semi-micro cuvettes, high form, Volume ml: 2.5, Path length mm: 10
Disposable cuvettes | Description: Semi-micro cuvettes, high form, Volume ml: 2.5, Path length mm: 10
Brand: Kartell S.p.A.Available in 8 variantsDisposable cuvettes for spectroscopy, in optical-quality PS and UV grade PMMA with optical windows for optimum transmittance when using wavelengths from 340nm to 800nm (PS) and from 280nm to 800nm (PMMA). Moulding and quality control determine the reproducibility of cuvettes. Kartell cuvettes are strictly controlled and varations should be within the range ±1% absorption. This is the vital when batch analysis is being undertaken.
€27,48
Eppendorf Cuvette rack, PP | Array: 30
Eppendorf Cuvette rack, PP | Array: 30
Brand: Eppendorf SENumbered positions for easy handling and identificationMade of high quality polypropylene (PP) for chemical and physical resistanceTemperature stability from -86 °C to 121 °CAutoclavable (121 °C, 20 min)Laboratory washer-safe for easy cleaningStackable to save lab space
€50,20
Flame Photometer FF-200 | Type: FF-200D-I
Flame Photometer FF-200 | Type: FF-200D-I
Brand: Cole-Parmer Ltd. (Jenway)Available in 2 variantsSingle channel, low temperature flame photometer for use in industry, medicine and education. Can be operated with propane, butane, natural gas or liquid gas (LPG). With built-in electronic flame failure safety system for operational safety.Model FF-200D-I incl. Na, K, Ca, Ba and Li filtersModel FF-200D-R incl. Na, K and Li filters3 year warrantySupplied with: Na, K, Li filters (model FF-200D-R), additionally Ba and Ca filter (model FF-200D-I), connecting hoses and clips, compressor plug, drain trap, fuses and operating/service instructions
€5.420,18
Flame photometer FF-200D-R | Type: FF-200D-R, Measured range: 120 ... 160 ppm Na0 ... 10 ppm K, Detection limit: ≤0.2 ppm Na/K≤0.25 ppm Li
Flame photometer FF-200D-R | Type: FF-200D-R, Measured range: 120 ... 160 ppm Na0 ... 10 ppm K, Detection limit: ≤0.2 ppm Na/K≤0.25 ppm Li
Brand: Cole-Parmer InstrumentSupplied with: Na, K, Li filters, connecting hoses and clips, compressor plug, drain trap, fuses and operating/service instructions
€5.997,60
Flame Photometers FP8000 series | Type: FP8400, Sample volume ml: 2.5, Description: manual sample feeding
Flame Photometers FP8000 series | Type: FP8400, Sample volume ml: 2.5, Description: manual sample feeding
Brand: A. Krüss Optronic GmbHAvailable in 4 variantsEven the lowest concentrations of alkali and alkaline earth elements in aqueous solutions can be determined cost-effectively and user-friendly. Simultaneous measurement of the elements Na, K, Ca and Li in the laboratory and process analysis (others on request). Thanks to proven measuring methods and modern instrument electronics, the flame photometers achieve precise and reproducible measurement results in a matter of seconds with maximum operational reliability. Suitable for individual measurements, fully automatic measuring operation, continuous operation and use as a process instrument.Economic, user-friendly and durable solution for use in laboratory and process operationSimultaneous measurement of up to four alkaline and alkaline earth elements, depending on model up to 300 measurements per hourMaximum operational safety through intelligent security mechanismsSimple operation through touch screen and intuitive softwareTo use with Popan/Butan (alkaline elements) and Acetylene (alkaline earth elements)Interfaces: 2 x USB, 1 x Ethernet, 1 x RS-232 for printer, FP8500 additionally: Upgrade 4 to 20 mA analogue, passive current interfaceCompliance with international norms and standards
€37.210,79
Flow-through cells with two optical paths lengths, Absorption and Fluorescence Measurement | Type: semi-micro*, Path length mm: 2 x 10, Capacity µl: 220
Flow-through cells with two optical paths lengths, Absorption and Fluorescence Measurement | Type: semi-micro*, Path length mm: 2 x 10, Capacity µl: 220
Brand: Hellma GmbH & Co. KGAvailable in 10 variantsWavelength Range: 200nm - 2500nmOptical material: Quartz glass High Performance
€890,00

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.