Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

373839404142
Measuring cylinders, PP, tall form, class B, blue moulded graduations | Capacity ml: 10, Grad. ml: 0.20, Tolerance ± ml: 0.2
Measuring cylinders, PP, tall form, class B, blue moulded graduations | Capacity ml: 10, Grad. ml: 0.20, Tolerance ± ml: 0.2
Brand: VITLAB GmbHAvailable in 8 variantsHighly transparent. With easily readable, raised, embossed blue scale and ring marks at the primary scale points. Calibrated 'In'. Class B tolerances according to DIN 12681 / ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80ºC does not cause tolerance limits to be permanently exceeded. To preserve markings, do not clean at temperatures exceeding 60ºC.Food-safe product according to regulation (EU) No. 10/2011.
€4,12
Measuring cylinders, PP, tall form, class B, moulded graduations | Capacity ml: 10, Grad. ml: 0.20, Tolerance ± ml: 0.2
Measuring cylinders, PP, tall form, class B, moulded graduations | Capacity ml: 10, Grad. ml: 0.20, Tolerance ± ml: 0.2
Brand: VITLAB GmbHAvailable in 8 variantsTall form. Highly transparent. With a raised scale and ring marks at the primary scale points, calibrated In'. Class B tolerances according to DIN 12681 / ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 80ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.
€2,50
Measuring cylinders, PP, tall form, class B, moulded graduations | Capacity ml: 10, Tolerance ± ml: 0.2, Grad. ml: 0.2
Measuring cylinders, PP, tall form, class B, moulded graduations | Capacity ml: 10, Tolerance ± ml: 0.2, Grad. ml: 0.2
Brand: ISOLAB Laborgeräte GmbHAvailable in 7 variantsManufactured from ultra clear, virgin polypropylene and its thick walls eliminate distortion.They offer high transperency, chemical resistance and remarkable heat tolerance.They meet the highest quality standards according to DIN 12681 and ISO 6706.Individually calibrated through automatic calibration process carried out by robots.Permanent quality control through all steps eliminate possible deviations from nominal values.Cylinders are calibrated to contain (In) and the tolerances are according to DIN/ISO Class "B" standards.Graduations are embossed and specially designed for plastic and resistant to 60°C.For consistent accurracy, polypropylene measuring cylinders should not be used with liquids over 60°C and should not be kept under direct sunlight or overheated conditions.
€2,04
Measuring Cylinders, PP, Tall Form, Class B, Moulded Graduations | Capacity ml: 25, Grad. ml: 5, Grad. ml: 0,5
Measuring Cylinders, PP, Tall Form, Class B, Moulded Graduations | Capacity ml: 25, Grad. ml: 5, Grad. ml: 0,5
Brand: Kartell S.p.A.Available in 8 variantsConforms to ISO 6706 - 1981 (E), high transparency. Autoclavable at 121 °C for 20 min., permanently heat resistant up to 100 °C. Durable, moulded graduation. Inner surface with very low wettability, therefore no meniscus formation. Food safe.
€7,20
Measuring cylinders, PP, with handle, moulded graduations | Capacity ml: 2000, Height mm: 490
Measuring cylinders, PP, with handle, moulded graduations | Capacity ml: 2000, Height mm: 490
Brand: Bel-Art ProductsAvailable in 2 variantsThe large handle provides a secure grip for safer, more controlled and convenient pouring. A double scale is accurate and easy to read. The wide hexagonal base prevents tip over and rolling on the benchtop. One litre and two litre sizes.Autoclavable at 121°C
€118,25
Measuring cylinders, SAN, low form, class B, moulded graduations | Capacity ml: 50, Grad. ml: 1.00, Tolerance ± ml: 1.00
Measuring cylinders, SAN, low form, class B, moulded graduations | Capacity ml: 50, Grad. ml: 1.00, Tolerance ± ml: 1.00
Brand: VITLAB GmbHAvailable in 6 variantsShort form. Crystal clear. With a raised scale and ring marks at the primary scale points, calibrated IN. Thermal stress up to 60 ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.
€4,61
Measuring cylinders, SAN, tall form, class B, moulded graduations | Capacity ml: 1000, Grad. ml: 10.00, Tolerance ± ml: 10.00
Measuring cylinders, SAN, tall form, class B, moulded graduations | Capacity ml: 1000, Grad. ml: 10.00, Tolerance ± ml: 10.00
Brand: VITLAB GmbHAvailable in 5 variantsTall form. Crystal clear. With a raised scale and ring marks at the primary scale points, calibrated IN. Class B tolerances according to DIN 12681/ISO 6706. Hexagonal base with bottom studs provides high stability. Thermal stress up to 60 ºC does not cause tolerance limits to be permanently exceeded. Food-safe product according to regulation (EU) No. 10/2011.
€21,03
Measuring Flask, DURAN®, Class A, Blue Graduation, PE Stopper, USP | Nominal capacity: 200 ml, Tolerance: 0,1 ± ml, Height: 210 mm
Measuring Flask, DURAN®, Class A, Blue Graduation, PE Stopper, USP | Nominal capacity: 200 ml, Tolerance: 0,1 ± ml, Height: 210 mm
Brand: Hirschmann Laborgeräte GmbHAvailable in 11 variantsMeasuring flask, class A, DURAN®, blue graduation, USP, with dated batch identification, standard ground and PE stopper. Additional USP batch certificates can be generated and printed at any time free of charge at www.hirschmannlab.com.
€30,35
Measuring Flask, DURAN®, Class A, Blue Graduation, without Stopper | Nominal capacity: 5 ml, Tolerance: 0,04 ± ml, Height: 70 mm
Measuring Flask, DURAN®, Class A, Blue Graduation, without Stopper | Nominal capacity: 5 ml, Tolerance: 0,04 ± ml, Height: 70 mm
Brand: Hirschmann Laborgeräte GmbHAvailable in 20 variantsCertified conformity, with dated batch identification, standard ground, without stopper, calibrated for IN, DIN EN ISO 1042. Additional batch certificates can be generated and printed at any time free of charge at www.hirschmannlab.com.
€19,65
Measuring pipette, serology, AR®-glass, class B | Nominal capacity: 1 ml, Division: 0.01 ml, Tolerance: 0,01 ± ml
Measuring pipette, serology, AR®-glass, class B | Nominal capacity: 1 ml, Division: 0.01 ml, Tolerance: 0,01 ± ml
Brand: Hirschmann Laborgeräte GmbHAvailable in 5 variantsDurable graduation with brown silver diffusion ink, wide opening. For serology. Graduation marks, with expanded tip opening, zero point at top, graduated to tip. With standard cotton plug from 5 ml.
€11,00
Measuring pipette, Soda-lime glass, class AS, brown graduation, type 1 | Nominal capacity: 0.01 ml, Division: 0.01 ml, Tolerance: 0,01 ± ml
Measuring pipette, Soda-lime glass, class AS, brown graduation, type 1 | Nominal capacity: 0.01 ml, Division: 0.01 ml, Tolerance: 0,01 ± ml
Brand: Hirschmann Laborgeräte GmbHAvailable in 7 variantsCalibrated for EX. Durable gradution with silver diffusion ink, certified conformity, with dated batch identification. Main point ring graduation, not graduated to tip (partial delivery). With standard cotton plug from 5 ml, zero point at top, type 3, DIN EN ISO 835. Additional batch certificates can be generated and printed at any time free of charge at the manufacturer's website.
€9,00
Membrane filter for pipette controller | Description: PTFE, 0.2 µm, hydrophobic, sterile, For: accu-jet® pro/S
Membrane filter for pipette controller | Description: PTFE, 0.2 µm, hydrophobic, sterile, For: accu-jet® pro/S
Brand: BRAND GMBH + CO.KGAvailable in 4 variantsHousing made of PP.
€6,90
373839404142

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.