Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

Tintometer GmbH
123456
Multiparameter meters SD 335 | Type: SD 335 Multi (Set 2) pH / DO / Temp.
Multiparameter meters SD 335 | Type: SD 335 Multi (Set 2) pH / DO / Temp.
Brand: Tintometer GmbHAvailable in 3 variantsDepending on the set, the portable multi-parameter measuring device is ideally suited for the precise determination of pH, redox, temperature, conductivity / TDS / salinity as well as saturation and concentration of dissolved oxygen.Intuitive user interface thanks to graphical LCD displaySimultaneous determination of up to three parameters due to galvanic isolationSelection between multi-parameter display or single value displaySetting of alarm limits for parameter monitoringMicro-USB connection for software-free data transmission and power supplyData logger records measurement data incl. time stamp and measuring point ID in a fixed time interval or manually at the push of a buttonAutomatic recognition of standard solutionsEvaluation of the sensor quality after calibrationRechargeable NiMH batteriesScope of supply: Meter, protective armouring, electrode holder for 2 electrodes, pH/temp. electrode type 231, pH buffer (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, 3 x AAA-NiMH rechargeable batteries, user manualSD 335 Multi (Set 1) pH / Con / Temp. additionally: Conductivity electrode LC 12 (< 200 mS/cm), conductivity solution 1413 µS/cm (NIST)SD 335 Multi (Set 2): pH / DO / Temp. additionally: Galvanic oxygen sensor (2 m cable), refill electrolyte, membrane heads, calibration bottle with spongeSD 335 Multi (Set 3): pH / Con / DO / Temp. additionally: Conductivity electrode LC 12 (< 200 mS/cm), conductivity solution 1413 µS/cm (NIST), galvanic oxygen sensor (2 m cable), refill electrolyte, membrane heads, calibration bottle with sponge
€1.420,00
Multiparameter meters SD 335 | Type: SD 335 Multi (Set 3) pH / Con / DO / Temp.
Multiparameter meters SD 335 | Type: SD 335 Multi (Set 3) pH / Con / DO / Temp.
Brand: Tintometer GmbHAvailable in 3 variantsDepending on the set, the portable multi-parameter measuring device is ideally suited for the precise determination of pH, redox, temperature, conductivity / TDS / salinity as well as saturation and concentration of dissolved oxygen.Intuitive user interface thanks to graphical LCD displaySimultaneous determination of up to three parameters due to galvanic isolationSelection between multi-parameter display or single value displaySetting of alarm limits for parameter monitoringMicro-USB connection for software-free data transmission and power supplyData logger records measurement data incl. time stamp and measuring point ID in a fixed time interval or manually at the push of a buttonAutomatic recognition of standard solutionsEvaluation of the sensor quality after calibrationRechargeable NiMH batteriesScope of supply: Meter, protective armouring, electrode holder for 2 electrodes, pH/temp. electrode type 231, pH buffer (4.01 / 7.00 / 10.01), storage solution for pH/ORP electrodes, 3 x AAA-NiMH rechargeable batteries, user manualSD 335 Multi (Set 1) pH / Con / Temp. additionally: Conductivity electrode LC 12 (< 200 mS/cm), conductivity solution 1413 µS/cm (NIST)SD 335 Multi (Set 2): pH / DO / Temp. additionally: Galvanic oxygen sensor (2 m cable), refill electrolyte, membrane heads, calibration bottle with spongeSD 335 Multi (Set 3): pH / Con / DO / Temp. additionally: Conductivity electrode LC 12 (< 200 mS/cm), conductivity solution 1413 µS/cm (NIST), galvanic oxygen sensor (2 m cable), refill electrolyte, membrane heads, calibration bottle with sponge
€1.827,50
Multiparameter meters SensoDirect 150 | Type: SensoDirect 150 (Set 1) pH/Con/Oxi
Multiparameter meters SensoDirect 150 | Type: SensoDirect 150 (Set 1) pH/Con/Oxi
Brand: Tintometer GmbHAvailable in 3 variantsThe SD 150 Multi-Parameter handheld instrument is ideal for the sequential determination of pH, Redox/ORP, conductivity, TDS and dissolved oxygen and combines the applications of several instruments in one portable device.Large, easy to read LCD display with contrast adjustmentAutomatic recognition of standard solutionsAutomatic temperature compensationReal time data loggerScope of supply: Instrument, batteries, protective armouring, electrode holder, pH electrode type 226, temperature sensor Pt1000, pH buffer, manualSensoDirect 150 (Set 1) pH / Con / TDS / Oxi / Temp. additionally: Conductivity cell, oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 2) pH / Con / TDS /Temp. additionally: Conductivity cellSensoDirect 150 (Set 3) pH / Oxi / Temp. additionally: Oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 4) pH / Redox / Temp. additionally: Redox electrode
€787,10
Multiparameter meters SensoDirect 150 | Type: SensoDirect 150 (Set 2) pH/Con
Multiparameter meters SensoDirect 150 | Type: SensoDirect 150 (Set 2) pH/Con
Brand: Tintometer GmbHAvailable in 3 variantsThe SD 150 Multi-Parameter handheld instrument is ideal for the sequential determination of pH, Redox/ORP, conductivity, TDS and dissolved oxygen and combines the applications of several instruments in one portable device.Large, easy to read LCD display with contrast adjustmentAutomatic recognition of standard solutionsAutomatic temperature compensationReal time data loggerScope of supply: Instrument, batteries, protective armouring, electrode holder, pH electrode type 226, temperature sensor Pt1000, pH buffer, manualSensoDirect 150 (Set 1) pH / Con / TDS / Oxi / Temp. additionally: Conductivity cell, oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 2) pH / Con / TDS /Temp. additionally: Conductivity cellSensoDirect 150 (Set 3) pH / Oxi / Temp. additionally: Oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 4) pH / Redox / Temp. additionally: Redox electrode
€683,10
Multiparameter meters SensoDirect 150 | Type: SensoDirect 150 (Set 3) pH/Oxi
Multiparameter meters SensoDirect 150 | Type: SensoDirect 150 (Set 3) pH/Oxi
Brand: Tintometer GmbHAvailable in 3 variantsThe SD 150 Multi-Parameter handheld instrument is ideal for the sequential determination of pH, Redox/ORP, conductivity, TDS and dissolved oxygen and combines the applications of several instruments in one portable device.Large, easy to read LCD display with contrast adjustmentAutomatic recognition of standard solutionsAutomatic temperature compensationReal time data loggerScope of supply: Instrument, batteries, protective armouring, electrode holder, pH electrode type 226, temperature sensor Pt1000, pH buffer, manualSensoDirect 150 (Set 1) pH / Con / TDS / Oxi / Temp. additionally: Conductivity cell, oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 2) pH / Con / TDS /Temp. additionally: Conductivity cellSensoDirect 150 (Set 3) pH / Oxi / Temp. additionally: Oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 4) pH / Redox / Temp. additionally: Redox electrode
€717,90
Multiparameter meters SensoDirect 150 | Type: SensoDirect 150 (Set 4) pH/Redox
Multiparameter meters SensoDirect 150 | Type: SensoDirect 150 (Set 4) pH/Redox
Brand: Tintometer GmbHAvailable in 3 variantsThe SD 150 Multi-Parameter handheld instrument is ideal for the sequential determination of pH, Redox/ORP, conductivity, TDS and dissolved oxygen and combines the applications of several instruments in one portable device.Large, easy to read LCD display with contrast adjustmentAutomatic recognition of standard solutionsAutomatic temperature compensationReal time data loggerScope of supply: Instrument, batteries, protective armouring, electrode holder, pH electrode type 226, temperature sensor Pt1000, pH buffer, manualSensoDirect 150 (Set 1) pH / Con / TDS / Oxi / Temp. additionally: Conductivity cell, oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 2) pH / Con / TDS /Temp. additionally: Conductivity cellSensoDirect 150 (Set 3) pH / Oxi / Temp. additionally: Oxygen sensor, electrolyte, membrane headsSensoDirect 150 (Set 4) pH / Redox / Temp. additionally: Redox electrode
€728,10
Oxygen meter SD 315 Oxi | Type: SD 315 Oxi (Set 1), Cable length m: 2.0
Oxygen meter SD 315 Oxi | Type: SD 315 Oxi (Set 1), Cable length m: 2.0
Brand: Tintometer GmbHAvailable in 2 variantsThe portable hand-held measuring instrument SD 315 Oxi meets the daily requirements for a robust and reliable instrument for the determination of dissolved oxygen in aqueous media. The Clark oxygen sensor with integrated temperature probe enables immediate measurements without time-consuming run-in time (polarisation time).Simple calibration against air or according to DIN EN ISO 5814Alarm function with adjustable limitsAutomatic pressure and temperature compensationAuto Hold FunctionAutomatic switch-off individually selectable from 1 to 120 minBacklit LCD displaySensor status display in % after each calibrationSalinity correctionParameter: dissolved oxygen (O2), O2 concentration in mg / l, O2 saturation in %, temperature in °C / °FBattery status indicatorFlexible stand at the rear allows the unit to be set up or fastened to a belt.Data transfer and evaluation via software possibleScope of supply: Instrument, protective covering, electrode holder, carrying case, galvanic oxygen sensor, KOH refill electrolyte, spare membrane, calibration bottle with sponge, batteries, manual
€1.025,20
Oxygen meter SD 315 Oxi | Type: SD 315 Oxi (Set 2), Cable length m: 10.0
Oxygen meter SD 315 Oxi | Type: SD 315 Oxi (Set 2), Cable length m: 10.0
Brand: Tintometer GmbHAvailable in 2 variantsThe portable hand-held measuring instrument SD 315 Oxi meets the daily requirements for a robust and reliable instrument for the determination of dissolved oxygen in aqueous media. The Clark oxygen sensor with integrated temperature probe enables immediate measurements without time-consuming run-in time (polarisation time).Simple calibration against air or according to DIN EN ISO 5814Alarm function with adjustable limitsAutomatic pressure and temperature compensationAuto Hold FunctionAutomatic switch-off individually selectable from 1 to 120 minBacklit LCD displaySensor status display in % after each calibrationSalinity correctionParameter: dissolved oxygen (O2), O2 concentration in mg / l, O2 saturation in %, temperature in °C / °FBattery status indicatorFlexible stand at the rear allows the unit to be set up or fastened to a belt.Data transfer and evaluation via software possibleScope of supply: Instrument, protective covering, electrode holder, carrying case, galvanic oxygen sensor, KOH refill electrolyte, spare membrane, calibration bottle with sponge, batteries, manual
€1.049,90
Oxygen meter SD 400 Oxi L | Description: SD 400 Oxi L (base unit without sensor only)
Oxygen meter SD 400 Oxi L | Description: SD 400 Oxi L (base unit without sensor only)
Brand: Tintometer GmbHAvailable in 4 variantsOxygen meter for use in sewage and water works, research and teaching as well as in aquaristics. High measuring accuracy and low maintenance, thanks to luminescence technology no electrolyte solution is required. The SD 400 Oxi L is ideally suited for the determination of "dilution BOD" due to the optimized probe for standard BOD bottles.Especially high measuring accuracy by luminescence technologyShort response time of the oxygen probeLow maintenance due to long-lasting oxygen probe and membrane headInflow to the oxygen probe is not necessary, the use of stirrers or manual stirring is no longer requiredIncludes software for extended and simplified data management with data logger functionBacklit LC display for dark environmentsScope of supply:SD 400 Oxi L (Set 1): Meter with 4 (AA) batteries, optical oxygen probe with 1.5 m cable, storage/calibration bottle, micro SD card with calibration data, software and manual (on Micro SD card), short manual, lanyard in caseSD 400 Oxi L (Set 2): as Set 1 but with optical oxygen probe with 3 m cableSD 400 Oxi L (Set 3): as Set 2 but with optical oxygen probe with 10 m cable
€446,90
Oxygen meter SD 400 Oxi L | Description: SD 400 Oxi L (Set 1)
Oxygen meter SD 400 Oxi L | Description: SD 400 Oxi L (Set 1)
Brand: Tintometer GmbHAvailable in 4 variantsOxygen meter for use in sewage and water works, research and teaching as well as in aquaristics. High measuring accuracy and low maintenance, thanks to luminescence technology no electrolyte solution is required. The SD 400 Oxi L is ideally suited for the determination of "dilution BOD" due to the optimized probe for standard BOD bottles.Especially high measuring accuracy by luminescence technologyShort response time of the oxygen probeLow maintenance due to long-lasting oxygen probe and membrane headInflow to the oxygen probe is not necessary, the use of stirrers or manual stirring is no longer requiredIncludes software for extended and simplified data management with data logger functionBacklit LC display for dark environmentsScope of supply:SD 400 Oxi L (Set 1): Meter with 4 (AA) batteries, optical oxygen probe with 1.5 m cable, storage/calibration bottle, micro SD card with calibration data, software and manual (on Micro SD card), short manual, lanyard in caseSD 400 Oxi L (Set 2): as Set 1 but with optical oxygen probe with 3 m cableSD 400 Oxi L (Set 3): as Set 2 but with optical oxygen probe with 10 m cable
€986,30
Oxygen meter SD 400 Oxi L | Description: SD 400 Oxi L (Set 2)
Oxygen meter SD 400 Oxi L | Description: SD 400 Oxi L (Set 2)
Brand: Tintometer GmbHAvailable in 4 variantsOxygen meter for use in sewage and water works, research and teaching as well as in aquaristics. High measuring accuracy and low maintenance, thanks to luminescence technology no electrolyte solution is required. The SD 400 Oxi L is ideally suited for the determination of "dilution BOD" due to the optimized probe for standard BOD bottles.Especially high measuring accuracy by luminescence technologyShort response time of the oxygen probeLow maintenance due to long-lasting oxygen probe and membrane headInflow to the oxygen probe is not necessary, the use of stirrers or manual stirring is no longer requiredIncludes software for extended and simplified data management with data logger functionBacklit LC display for dark environmentsScope of supply:SD 400 Oxi L (Set 1): Meter with 4 (AA) batteries, optical oxygen probe with 1.5 m cable, storage/calibration bottle, micro SD card with calibration data, software and manual (on Micro SD card), short manual, lanyard in caseSD 400 Oxi L (Set 2): as Set 1 but with optical oxygen probe with 3 m cableSD 400 Oxi L (Set 3): as Set 2 but with optical oxygen probe with 10 m cable
€1.048,30
Oxygen meter SD 400 Oxi L | Description: SD 400 Oxi L (Set 3)
Oxygen meter SD 400 Oxi L | Description: SD 400 Oxi L (Set 3)
Brand: Tintometer GmbHAvailable in 4 variantsOxygen meter for use in sewage and water works, research and teaching as well as in aquaristics. High measuring accuracy and low maintenance, thanks to luminescence technology no electrolyte solution is required. The SD 400 Oxi L is ideally suited for the determination of "dilution BOD" due to the optimized probe for standard BOD bottles.Especially high measuring accuracy by luminescence technologyShort response time of the oxygen probeLow maintenance due to long-lasting oxygen probe and membrane headInflow to the oxygen probe is not necessary, the use of stirrers or manual stirring is no longer requiredIncludes software for extended and simplified data management with data logger functionBacklit LC display for dark environmentsScope of supply:SD 400 Oxi L (Set 1): Meter with 4 (AA) batteries, optical oxygen probe with 1.5 m cable, storage/calibration bottle, micro SD card with calibration data, software and manual (on Micro SD card), short manual, lanyard in caseSD 400 Oxi L (Set 2): as Set 1 but with optical oxygen probe with 3 m cableSD 400 Oxi L (Set 3): as Set 2 but with optical oxygen probe with 10 m cable
€1.095,20
123456

Copyright © 2024 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.