Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

Bürkle GmbH
345678
Core sampler, Stainless steel AISI 316 | Length mm: 200, Ø mm: 15, Nominal capacity ml: 15
Core sampler, Stainless steel AISI 316 | Length mm: 200, Ø mm: 15, Nominal capacity ml: 15
Brand: Bürkle GmbHAvailable in 3 variantsThe core sampler can be used to take samples of bulk materials which can easily become stuck or settle during sampling due to their particle form. In comparison to standard all-layer samplers for bulk materials, the two-part core sampler has no gap dimensions in which the medium can become stuck while it is being removed. This makes it possible to take a proper sample of powders and granulates through multiple layers, for example glass balls or metal powders. Depending on the size, the stainless steel sampler can be used for a wide range of different containers, for example big bags or small containers. The bulk material sampler takes a representative core sample and is ideal for use in various laboratory and industrialapplications.Scope of supply: Core sampler (consisting of boring rod and boring tube), fixing clip
€528,80
Core sampler, Stainless steel AISI 316 | Length mm: 400, Ø mm: 25, Nominal capacity ml: 110
Core sampler, Stainless steel AISI 316 | Length mm: 400, Ø mm: 25, Nominal capacity ml: 110
Brand: Bürkle GmbHAvailable in 3 variantsThe core sampler can be used to take samples of bulk materials which can easily become stuck or settle during sampling due to their particle form. In comparison to standard all-layer samplers for bulk materials, the two-part core sampler has no gap dimensions in which the medium can become stuck while it is being removed. This makes it possible to take a proper sample of powders and granulates through multiple layers, for example glass balls or metal powders. Depending on the size, the stainless steel sampler can be used for a wide range of different containers, for example big bags or small containers. The bulk material sampler takes a representative core sample and is ideal for use in various laboratory and industrialapplications.Scope of supply: Core sampler (consisting of boring rod and boring tube), fixing clip
€575,15
Core sampler, Stainless steel AISI 316 | Length mm: 800, Ø mm: 25, Nominal capacity ml: 230
Core sampler, Stainless steel AISI 316 | Length mm: 800, Ø mm: 25, Nominal capacity ml: 230
Brand: Bürkle GmbHAvailable in 3 variantsThe core sampler can be used to take samples of bulk materials which can easily become stuck or settle during sampling due to their particle form. In comparison to standard all-layer samplers for bulk materials, the two-part core sampler has no gap dimensions in which the medium can become stuck while it is being removed. This makes it possible to take a proper sample of powders and granulates through multiple layers, for example glass balls or metal powders. Depending on the size, the stainless steel sampler can be used for a wide range of different containers, for example big bags or small containers. The bulk material sampler takes a representative core sample and is ideal for use in various laboratory and industrialapplications.Scope of supply: Core sampler (consisting of boring rod and boring tube), fixing clip
€623,90
Depth stop for samplers | Ø: 150 mm, For ext. Ø: 25 mm, Material: Stainless steel 1.4404
Depth stop for samplers | Ø: 150 mm, For ext. Ø: 25 mm, Material: Stainless steel 1.4404
Brand: Bürkle GmbHAvailable in 2 variantsThe depth stop can be clamped to any height of the sampler. This ensures that the sampler penetrates to the same desired depth each time it is pierced. In addition, accidental puncturing during sampling is prevented.For standardised, reproducible samplingFixation by C-clamping screwAutoclavableFood safe
€162,55
Depth stop for samplers | Ø: 250 mm, For ext. Ø: 50 mm, Material: Aluminium/Stainless steel 1.4301
Depth stop for samplers | Ø: 250 mm, For ext. Ø: 50 mm, Material: Aluminium/Stainless steel 1.4301
Brand: Bürkle GmbHAvailable in 2 variantsThe depth stop can be clamped to any height of the sampler. This ensures that the sampler penetrates to the same desired depth each time it is pierced. In addition, accidental puncturing during sampling is prevented.For standardised, reproducible samplingFixation by C-clamping screwAutoclavableFood safe
€204,10
Dip samplers, PP | Volume ml: 140, Immersion depth: 500 mm, Ø mm: 25
Dip samplers, PP | Volume ml: 140, Immersion depth: 500 mm, Ø mm: 25
Brand: Bürkle GmbHAvailable in 3 variantsFor simple removal of liquid samples.Good view due to transparent tubesUpper end with reflux valve, lower end with ball valveAll-layer and point sampling possible500 ml dip sampler stepless extendable
€52,65
Dip samplers, PP | Volume ml: 280, Immersion depth: 1000 mm, Ø mm: 25
Dip samplers, PP | Volume ml: 280, Immersion depth: 1000 mm, Ø mm: 25
Brand: Bürkle GmbHAvailable in 3 variantsFor simple removal of liquid samples.Good view due to transparent tubesUpper end with reflux valve, lower end with ball valveAll-layer and point sampling possible500 ml dip sampler stepless extendable
€56,45
Dip samplers, PP | Volume ml: 500, Immersion depth: 1000 - 2000 mm, Ø mm: 25
Dip samplers, PP | Volume ml: 500, Immersion depth: 1000 - 2000 mm, Ø mm: 25
Brand: Bürkle GmbHAvailable in 3 variantsFor simple removal of liquid samples.Good view due to transparent tubesUpper end with reflux valve, lower end with ball valveAll-layer and point sampling possible500 ml dip sampler stepless extendable
€67,80
Dipping vessels for sampling
Dipping vessels for sampling
Brand: Bürkle GmbHAvailable in 7 variantsAccording to DIN 51750 pt. 2Dipping VesselFor sampling liquids from tanks, lorry tankers, etc. Made of brass or stainless steel AISI 304 (1.4301) for Ex areas. 1 L capacity, 82 mm diameter, 427 mm height with handle. Without lowering cable.Operation: When the dipping vessel is lowered, the liquid constantly runs through it. By pulling back, both valves close automatically.Emptying at the top via the open flaps.Dipping bottle EXFor sampling flammable liquids.For sampling category A mineral oil products, Explosion Categories IIA, IIB and IIC. Made from brass that do not produce sparks, 89 mm diameter, 443 mm height with handle, weight 3.3 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain.Dipping bottle glassFor sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000 ml capacity, 148 mm diameter, 330 mm high, weight 3.2 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.Immersion CylindersFor target spot and bottom samples of mineral oil products. Made of nickel-plated brass. Heavy, robust design (4.3 kg). Without lowering and pull cablesTarget spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.Target immersion cylinderWith the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. Weight 2.6 kg. With 5 m venting tube. Screw off top enables easy cleaning.Mini immersion cylinderFor sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Capacity 50 ml, 32 mm diameter, height 180 mm, weight 330 g. Without lowering cable. Upper body unscrews for easy cleaning.
€615,15
Dipping vessels for sampling | Type: Dipping bottle
Dipping vessels for sampling | Type: Dipping bottle
Brand: Bürkle GmbHAvailable in 7 variantsAccording to DIN 51750 pt. 2Dipping VesselFor sampling liquids from tanks, lorry tankers, etc. Made of brass or stainless steel AISI 304 (1.4301) for Ex areas. 1 L capacity, 82 mm diameter, 427 mm height with handle. Without lowering cable.Operation: When the dipping vessel is lowered, the liquid constantly runs through it. By pulling back, both valves close automatically.Emptying at the top via the open flaps.Dipping bottle EXFor sampling flammable liquids.For sampling category A mineral oil products, Explosion Categories IIA, IIB and IIC. Made from brass that do not produce sparks, 89 mm diameter, 443 mm height with handle, weight 3.3 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain.Dipping bottle glassFor sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000 ml capacity, 148 mm diameter, 330 mm high, weight 3.2 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.Immersion CylindersFor target spot and bottom samples of mineral oil products. Made of nickel-plated brass. Heavy, robust design (4.3 kg). Without lowering and pull cablesTarget spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.Target immersion cylinderWith the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. Weight 2.6 kg. With 5 m venting tube. Screw off top enables easy cleaning.Mini immersion cylinderFor sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Capacity 50 ml, 32 mm diameter, height 180 mm, weight 330 g. Without lowering cable. Upper body unscrews for easy cleaning.
€553,50
Dipping vessels for sampling | Type: Dipping bottles Ex
Dipping vessels for sampling | Type: Dipping bottles Ex
Brand: Bürkle GmbHAvailable in 7 variantsAccording to DIN 51750 pt. 2Dipping VesselFor sampling liquids from tanks, lorry tankers, etc. Made of brass or stainless steel AISI 304 (1.4301) for Ex areas. 1 L capacity, 82 mm diameter, 427 mm height with handle. Without lowering cable.Operation: When the dipping vessel is lowered, the liquid constantly runs through it. By pulling back, both valves close automatically.Emptying at the top via the open flaps.Dipping bottle EXFor sampling flammable liquids.For sampling category A mineral oil products, Explosion Categories IIA, IIB and IIC. Made from brass that do not produce sparks, 89 mm diameter, 443 mm height with handle, weight 3.3 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain.Dipping bottle glassFor sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000 ml capacity, 148 mm diameter, 330 mm high, weight 3.2 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.Immersion CylindersFor target spot and bottom samples of mineral oil products. Made of nickel-plated brass. Heavy, robust design (4.3 kg). Without lowering and pull cablesTarget spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.Target immersion cylinderWith the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. Weight 2.6 kg. With 5 m venting tube. Screw off top enables easy cleaning.Mini immersion cylinderFor sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Capacity 50 ml, 32 mm diameter, height 180 mm, weight 330 g. Without lowering cable. Upper body unscrews for easy cleaning.
€565,30
Dipping vessels for sampling | Type: Dipping vessel, stainless steel V2A
Dipping vessels for sampling | Type: Dipping vessel, stainless steel V2A
Brand: Bürkle GmbHAvailable in 7 variantsAccording to DIN 51750 pt. 2Dipping VesselFor sampling liquids from tanks, lorry tankers, etc. Made of brass or stainless steel AISI 304 (1.4301) for Ex areas. 1 L capacity, 82 mm diameter, 427 mm height with handle. Without lowering cable.Operation: When the dipping vessel is lowered, the liquid constantly runs through it. By pulling back, both valves close automatically.Emptying at the top via the open flaps.Dipping bottle EXFor sampling flammable liquids.For sampling category A mineral oil products, Explosion Categories IIA, IIB and IIC. Made from brass that do not produce sparks, 89 mm diameter, 443 mm height with handle, weight 3.3 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain.Dipping bottle glassFor sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000 ml capacity, 148 mm diameter, 330 mm high, weight 3.2 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.Immersion CylindersFor target spot and bottom samples of mineral oil products. Made of nickel-plated brass. Heavy, robust design (4.3 kg). Without lowering and pull cablesTarget spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.Target immersion cylinderWith the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. Weight 2.6 kg. With 5 m venting tube. Screw off top enables easy cleaning.Mini immersion cylinderFor sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Capacity 50 ml, 32 mm diameter, height 180 mm, weight 330 g. Without lowering cable. Upper body unscrews for easy cleaning.
€1.210,00
345678

Copyright © 2024 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.