Accessories
Analytical balances
Moisture balances
Other balances
Pocket balances
Precision balances
Weights
Analytical balances
Moisture balances
Other balances
Pocket balances
Precision balances
Weights
Buffer solutions
Electrode accessories
Ion selective Electrodes
Paper, chopstick
pH-Electrodes
Portable devices
Redox-Electrodes
Table devices
Electrode accessories
Ion selective Electrodes
Paper, chopstick
pH-Electrodes
Portable devices
Redox-Electrodes
Table devices
Overalls, coats, jackets, trousers
Overshoes, overboots, socks
Surgical masks, beard covers, hoods, sleeves
Overshoes, overboots, socks
Surgical masks, beard covers, hoods, sleeves
Chairs and stools
Gowing benches
Mats and floor coverings
Tables, shelves, trolleys, dispensers
Wardrobes
Gowing benches
Mats and floor coverings
Tables, shelves, trolleys, dispensers
Wardrobes
Components for Extraction
Components for reaction and distillation
Distillation-Accessories
Dropping Funnels
Flasks with NS joint neck
Flat ground flange reaction vessels
Gas wash bottles
Ground joints, attachable
KPG stirrer and bearings
Laboratory reactors
NS joints accessories
Reflux condenser
Standard ground stoppers
Stopcocks and Valves
Tubing adapters
Components for reaction and distillation
Distillation-Accessories
Dropping Funnels
Flasks with NS joint neck
Flat ground flange reaction vessels
Gas wash bottles
Ground joints, attachable
KPG stirrer and bearings
Laboratory reactors
NS joints accessories
Reflux condenser
Standard ground stoppers
Stopcocks and Valves
Tubing adapters
Biobanking
Cryogenic accessories
Cryogenic boxes
Cryogenic racks
Cryogenic storage tanks
Cryogenic tubes
Dewar flasks
Ice machines
Liquid nitrogen-Accessories
Low and Ultra low temperature freezers
Refrigerators and Freezers
Refrigerators and Freezers ex protected
Transport boxes
Cryogenic accessories
Cryogenic boxes
Cryogenic racks
Cryogenic storage tanks
Cryogenic tubes
Dewar flasks
Ice machines
Liquid nitrogen-Accessories
Low and Ultra low temperature freezers
Refrigerators and Freezers
Refrigerators and Freezers ex protected
Transport boxes
Concentration
DNA and RNA isolation
DNA-Electrophoresis
Electroporation
Gel-Documentation
PCR
PCR cabinets
Thermocyclers
DNA and RNA isolation
DNA-Electrophoresis
Electroporation
Gel-Documentation
PCR
PCR cabinets
Thermocyclers
Accessories and reagents
Dissecting sets
Embedding cassettes
Microtoms
Scalpels
Tissue floating baths
Dissecting sets
Embedding cassettes
Microtoms
Scalpels
Tissue floating baths
Cold light sources
Counting chambers
Digital microscopes and cameras
Light microscopes
Microscopy accessories
Slide covers
Slide storage
Slides
Staining racks
Stereomicroscopes
Counting chambers
Digital microscopes and cameras
Light microscopes
Microscopy accessories
Slide covers
Slide storage
Slides
Staining racks
Stereomicroscopes
- 2mag AG
- Apollo Herkenrath GmbH & Co.KG
- Argos Technologies, Inc.
- Behr Labor-Technik GmbH
- Bel-Art Products
- Bohlender GmbH
- BRAND GMBH + CO.KG
- Buddeberg GmbH
- Bürkle GmbH
- Cole-Parmer Ltd. (ET Stua)
- Cole-Parmer Ltd. (Stuart)
- Corning BV
- DWK Life Sciences Inc.(Wheaton
- Eder GmbH
- Edmund Bühler GmbH
- Eppendorf SE
- Grant Instruments Ltd.
- Heathrow Scientific LLC
- Heidolph Instruments
- IBI Scientific
- IKA-Werke GmbH & Co.KG
- Kartell S.p.A.
- Lauda Dr.R.Wobser GmbH & Co.KG
- LLG Labware
- Ohaus GmbH
- Phoenix Instrument GmbH
- schuett-biotec GmbH
- Scientific Industries, Inc.
- SHP Steriltechnik AG
- Thermo Elect.LED GmbH (H+P VM)
- Thermo Elect.LED GmbH (Kendro)
- Velp Scientifica SRL
- VITLAB GmbH
- Xylem Analytics Germany (SI)
Globe Stirrer Couplings, POM | Opening for stirrer shaft mm: Diam. 6.5 + 10, Chuck adaptor Ø bottom mm: 10, Overall length mm: 190
Brand: Bohlender GmbHAvailable in 8 variantsMade of POM, a plastic material with a good mechanical strength, powerful transmission of up to 300 Ncm, suitable for a speed of up to 1.200 rounds per minute, maximum misalignment of axes 10 mm. Ideal for balancing misalignment of axes between agitator and stirrer shaft, suitable for glass, metal or PTFE stirrer shafts.very low centrifugal forces due to low weightsuitable for both left and right-handed rotationno resonancesimple assembly by means of screw joints with clamp ringspivot (length 90 mm) can be shortened by the userGlobe Stirrer Couplings, POM | Opening for stirrer shaft mm: Diam. 6.5 + 10, Chuck adaptor Ø bottom mm: 10, Overall length mm: 190
€126,20
Globe Stirrer Couplings, POM | Opening for stirrer shaft mm: Diam. 6.5 + 10, Chuck adaptor Ø bottom mm: 8, Overall length mm: 190
Brand: Bohlender GmbHAvailable in 8 variantsMade of POM, a plastic material with a good mechanical strength, powerful transmission of up to 300 Ncm, suitable for a speed of up to 1.200 rounds per minute, maximum misalignment of axes 10 mm. Ideal for balancing misalignment of axes between agitator and stirrer shaft, suitable for glass, metal or PTFE stirrer shafts.very low centrifugal forces due to low weightsuitable for both left and right-handed rotationno resonancesimple assembly by means of screw joints with clamp ringspivot (length 90 mm) can be shortened by the userGlobe Stirrer Couplings, POM | Opening for stirrer shaft mm: Diam. 6.5 + 10, Chuck adaptor Ø bottom mm: 8, Overall length mm: 190
€139,18
Globe Stirrer Couplings, POM | Opening for stirrer shaft mm: Diam. 8 + 10, Chuck adaptor Ø bottom mm: 10, Overall length mm: 190
Brand: Bohlender GmbHAvailable in 8 variantsMade of POM, a plastic material with a good mechanical strength, powerful transmission of up to 300 Ncm, suitable for a speed of up to 1.200 rounds per minute, maximum misalignment of axes 10 mm. Ideal for balancing misalignment of axes between agitator and stirrer shaft, suitable for glass, metal or PTFE stirrer shafts.very low centrifugal forces due to low weightsuitable for both left and right-handed rotationno resonancesimple assembly by means of screw joints with clamp ringspivot (length 90 mm) can be shortened by the userGlobe Stirrer Couplings, POM | Opening for stirrer shaft mm: Diam. 8 + 10, Chuck adaptor Ø bottom mm: 10, Overall length mm: 190
€129,17
Globe Stirrer Couplings, POM | Opening for stirrer shaft mm: Diam. 8 + 10, Chuck adaptor Ø bottom mm: 8, Overall length mm: 190
Brand: Bohlender GmbHAvailable in 8 variantsMade of POM, a plastic material with a good mechanical strength, powerful transmission of up to 300 Ncm, suitable for a speed of up to 1.200 rounds per minute, maximum misalignment of axes 10 mm. Ideal for balancing misalignment of axes between agitator and stirrer shaft, suitable for glass, metal or PTFE stirrer shafts.very low centrifugal forces due to low weightsuitable for both left and right-handed rotationno resonancesimple assembly by means of screw joints with clamp ringspivot (length 90 mm) can be shortened by the userGlobe Stirrer Couplings, POM | Opening for stirrer shaft mm: Diam. 8 + 10, Chuck adaptor Ø bottom mm: 8, Overall length mm: 190
€129,11
Globe Stirrer Couplings, POM | Opening for stirrer shaft mm: GL 10, Chuck adaptor Ø bottom mm: 10, Overall length mm: 170
Brand: Bohlender GmbHAvailable in 8 variantsMade of POM, a plastic material with a good mechanical strength, powerful transmission of up to 300 Ncm, suitable for a speed of up to 1.200 rounds per minute, maximum misalignment of axes 10 mm. Ideal for balancing misalignment of axes between agitator and stirrer shaft, suitable for glass, metal or PTFE stirrer shafts.very low centrifugal forces due to low weightsuitable for both left and right-handed rotationno resonancesimple assembly by means of screw joints with clamp ringspivot (length 90 mm) can be shortened by the userGlobe Stirrer Couplings, POM | Opening for stirrer shaft mm: GL 10, Chuck adaptor Ø bottom mm: 10, Overall length mm: 170
€164,13
Globe Stirrer Couplings, POM | Opening for stirrer shaft mm: Inner square SW6, Chuck adaptor Ø bottom mm: SW8, Overall length mm: 180
Brand: Bohlender GmbHAvailable in 8 variantsMade of POM, a plastic material with a good mechanical strength, powerful transmission of up to 300 Ncm, suitable for a speed of up to 1.200 rounds per minute, maximum misalignment of axes 10 mm. Ideal for balancing misalignment of axes between agitator and stirrer shaft, suitable for glass, metal or PTFE stirrer shafts.very low centrifugal forces due to low weightsuitable for both left and right-handed rotationno resonancesimple assembly by means of screw joints with clamp ringspivot (length 90 mm) can be shortened by the userGlobe Stirrer Couplings, POM | Opening for stirrer shaft mm: Inner square SW6, Chuck adaptor Ø bottom mm: SW8, Overall length mm: 180
€136,51
Magnetic Stirrer Heads Complete | Shaft diam. mm: 10, NS: 29/32, drive shaft out side Ø mm: 97 mm
Brand: Bohlender GmbHAvailable in 3 variantsPerfect combination of drive shaft with ball bearings, rotor and lower bearing made of PTFE/PEEK and a rod made of borosilicate glass. Requires little space due to compact construction. No leakage or memory effects due to non-porous, welded rotor. This rotor holds the stirrer shaft by means of three stud screws which are fixed into counterbores on the stirrer shaft. This provides optimum power transmission and secure mounting. The 6mm square drive can be fixed into the stirrer coupling or into the agitator. powerful transmission of up to 50 Ncmno grease requiredall products exposed to the medium being stirred do not contain any metalshigh speed of up to max. 1500 rpmhigh working temperatures up to +250 °C are possibleexcellent chemical resistancesafe to run dryhigh durabilityMagnetic Stirrer Heads Complete | Shaft diam. mm: 10, NS: 29/32, drive shaft out side Ø mm: 97 mm
€1.374,52
Magnetic Stirrer Heads Complete | Shaft diam. mm: 6, NS: 19/26, drive shaft out side Ø mm: 28 mm
Brand: Bohlender GmbHAvailable in 3 variantsPerfect combination of drive shaft with ball bearings, rotor and lower bearing made of PTFE/PEEK and a rod made of borosilicate glass. Requires little space due to compact construction. No leakage or memory effects due to non-porous, welded rotor. This rotor holds the stirrer shaft by means of three stud screws which are fixed into counterbores on the stirrer shaft. This provides optimum power transmission and secure mounting. The 6mm square drive can be fixed into the stirrer coupling or into the agitator. powerful transmission of up to 50 Ncmno grease requiredall products exposed to the medium being stirred do not contain any metalshigh speed of up to max. 1500 rpmhigh working temperatures up to +250 °C are possibleexcellent chemical resistancesafe to run dryhigh durabilityMagnetic Stirrer Heads Complete | Shaft diam. mm: 6, NS: 19/26, drive shaft out side Ø mm: 28 mm
€1.080,96
Magnetic Stirrer Heads Complete | Shaft diam. mm: 8, NS: 29/32, drive shaft out side Ø mm: 35 mm
Brand: Bohlender GmbHAvailable in 3 variantsPerfect combination of drive shaft with ball bearings, rotor and lower bearing made of PTFE/PEEK and a rod made of borosilicate glass. Requires little space due to compact construction. No leakage or memory effects due to non-porous, welded rotor. This rotor holds the stirrer shaft by means of three stud screws which are fixed into counterbores on the stirrer shaft. This provides optimum power transmission and secure mounting. The 6mm square drive can be fixed into the stirrer coupling or into the agitator. powerful transmission of up to 50 Ncmno grease requiredall products exposed to the medium being stirred do not contain any metalshigh speed of up to max. 1500 rpmhigh working temperatures up to +250 °C are possibleexcellent chemical resistancesafe to run dryhigh durabilityMagnetic Stirrer Heads Complete | Shaft diam. mm: 8, NS: 29/32, drive shaft out side Ø mm: 35 mm
€1.396,06
Magnetic Stirrer Heads P-MRK | For diam. stirring rod mm: 10, Height mm: 145, Joint size NS: 29/32
Brand: Bohlender GmbHAvailable in 3 variantsIdeal stirrer head for PTFE-jacketed stirrer shafts from BOLA. Consisting of capsuled drive shaft (stainless steel) with ball bearings, rotor and lower bearing made of PTFE/PEEK and a hollow shaft made of borosilicate glass. Requires little space due to compact construction.No leakage or memory effects due to non-porous, welded rotor. Compression fittings for safe fixing of stirrer shaft and optimum power transmission. Joint-Cone with nut (Safe-Lab) for easy locking and unlocking of the ground joint. Square size 6mm for accepting an agitator or a stirrer coupling. Insertion length of shaft 95mm. Drive shaft outside diameter 50mm.gastight stirrer head for perfect vacuumstirrer shaft's height adjustable, approx. 40mmalso suitable for shortened stirrer shaftspowerful transmission of up to 90Ncmexcellent chemical resistanceall products which are exposed to the medium do not contain any metalsno grease required / save to run dryhigh speed of up to max. 1.500rpmdrive shaft fixed for your safetyhigh durabilityeasy disassembly of all parts for cleaningMagnetic Stirrer Heads P-MRK | For diam. stirring rod mm: 10, Height mm: 145, Joint size NS: 29/32
€1.148,51
Magnetic Stirrer Heads P-MRK | For diam. stirring rod mm: 10, Height mm: 145, Joint size NS: 45/40
Brand: Bohlender GmbHAvailable in 3 variantsIdeal stirrer head for PTFE-jacketed stirrer shafts from BOLA. Consisting of capsuled drive shaft (stainless steel) with ball bearings, rotor and lower bearing made of PTFE/PEEK and a hollow shaft made of borosilicate glass. Requires little space due to compact construction.No leakage or memory effects due to non-porous, welded rotor. Compression fittings for safe fixing of stirrer shaft and optimum power transmission. Joint-Cone with nut (Safe-Lab) for easy locking and unlocking of the ground joint. Square size 6mm for accepting an agitator or a stirrer coupling. Insertion length of shaft 95mm. Drive shaft outside diameter 50mm.gastight stirrer head for perfect vacuumstirrer shaft's height adjustable, approx. 40mmalso suitable for shortened stirrer shaftspowerful transmission of up to 90Ncmexcellent chemical resistanceall products which are exposed to the medium do not contain any metalsno grease required / save to run dryhigh speed of up to max. 1.500rpmdrive shaft fixed for your safetyhigh durabilityeasy disassembly of all parts for cleaningMagnetic Stirrer Heads P-MRK | For diam. stirring rod mm: 10, Height mm: 145, Joint size NS: 45/40
€1.104,85
Magnetic Stirrer Heads P-MRK | For diam. stirring rod mm: 8, Height mm: 145, Joint size NS: 29/32
Brand: Bohlender GmbHAvailable in 3 variantsIdeal stirrer head for PTFE-jacketed stirrer shafts from BOLA. Consisting of capsuled drive shaft (stainless steel) with ball bearings, rotor and lower bearing made of PTFE/PEEK and a hollow shaft made of borosilicate glass. Requires little space due to compact construction.No leakage or memory effects due to non-porous, welded rotor. Compression fittings for safe fixing of stirrer shaft and optimum power transmission. Joint-Cone with nut (Safe-Lab) for easy locking and unlocking of the ground joint. Square size 6mm for accepting an agitator or a stirrer coupling. Insertion length of shaft 95mm. Drive shaft outside diameter 50mm.gastight stirrer head for perfect vacuumstirrer shaft's height adjustable, approx. 40mmalso suitable for shortened stirrer shaftspowerful transmission of up to 90Ncmexcellent chemical resistanceall products which are exposed to the medium do not contain any metalsno grease required / save to run dryhigh speed of up to max. 1.500rpmdrive shaft fixed for your safetyhigh durabilityeasy disassembly of all parts for cleaningMagnetic Stirrer Heads P-MRK | For diam. stirring rod mm: 8, Height mm: 145, Joint size NS: 29/32
€1.073,22
Copyright © 2024 - Achrom nv - BE 0445.025.508 | General terms | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®