Please wait

Your message is being sent

An error occurred

Pear-shaped flasks with two-necks, DURAN® | Nominal capacity ml: 100, Centre neck: 14/23, Side necks NS: 14/23
Pear-shaped flasks with two-necks, DURAN® | Nominal capacity ml: 100, Centre neck: 14/23, Side necks NS: 14/23
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 4 variantsIn addition to DIN standard 12383, with angled side neck (25°), with conical ground joints, with inscription label.
€38,31
PF - laboratory-flange triple clamp, 18/10 stainless steel | Jaw opening mm: 100, Ø mm: 15.0
PF - laboratory-flange triple clamp, 18/10 stainless steel | Jaw opening mm: 100, Ø mm: 15.0
Brand: BOCHEM Instrumente GmbHAvailable in 4 variantsHolder for all PF- laboratory flasks for the alternating removal of vessel and lid. This special quick-release fastener ensures that the two laboratory flat flanges of reaction tube and flat flange lid are connected and, in addition, that the reaction tube and flat flange lid are held individually (optimal flange angle 45°). Without accessories.
€744,87
Phase separating papers Grade 480, circles | Ø mm: 70, Weight g / m²: 85, Thickness mm: 0.19
Phase separating papers Grade 480, circles | Ø mm: 70, Weight g / m²: 85, Thickness mm: 0.19
Brand: Sartorius Lab InstrumentsAvailable in 4 variantsFilter discs are impregnated with silicon and are suitable for separating water and organic solvents. The aqueous phase is retained, but the solvent can flow through.
€26,50
Phase separators, 1PS | Ø mm: 70
Phase separators, 1PS | Ø mm: 70
Brand: Cytiva Europe GmbHAvailable in 8 variantsA silicone impregnated, water repellent paper which can be used to separate aqueous solutions from immiscible solvents. The aqueous phase is retained and the organic phase passes through. Will retain solid particles. Can be used either flat under suction not exceeding 70mm Hg or quadrant folded in a conical glass funnel. Supplied in box of 100 circles.Note: This paper contains a small quantity of tin complex catalyst. It is therefore not recommended for use when this complex may cause interference, e.g. with the use of dithizone (diphenylthiocarbazone) reagent.
€47,00
Phase separators, Grade 480 | Type: Circles, Ø mm: 125
Phase separators, Grade 480 | Type: Circles, Ø mm: 125
Brand: Sartorius Lab InstrumentsAvailable in 4 variantsHydrophobic, silicone-impregnated filter paper. Allows the aqueous phase of an emulsion or other mixture to be separated based on water affinity. Suitable for the analysis of dressings or sauces.
€49,50
Plastic ferrule, angled, PP | Ø mm: 8.6, Neck diam. mm: 4
Plastic ferrule, angled, PP | Ø mm: 8.6, Neck diam. mm: 4
Brand: DWK Life Sciences GmbH (Duran)For screw connector caps GL 14With silicone seal (VMQ)Temperature resistant up to max. 140°CAutoclavable
€1,72
Powder flasks for Rotary evaporator RV 10, RV 8 und RV 3 | Type: RV 10.301, Volume ml: 1000, Joint size NS: 29/32
Powder flasks for Rotary evaporator RV 10, RV 8 und RV 3 | Type: RV 10.301, Volume ml: 1000, Joint size NS: 29/32
Brand: IKA-Werke GmbH & Co.KGAvailable in 3 variants
€224,00
Powder flasks with conical ground joint, DURAN® | Nominal capacity ml: 500, Socket NS: 29/32, Flask diam. mm: 101
Powder flasks with conical ground joint, DURAN® | Nominal capacity ml: 500, Socket NS: 29/32, Flask diam. mm: 101
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 5 variantsSpecially for rotary evaporators. For the drying of powder-like substances. With center neck and conical joint, with inscription label.
€104,63
Pre-filters, glass microfibre, type 134 | Ø mm: 124, Type: A
Pre-filters, glass microfibre, type 134 | Ø mm: 124, Type: A
Brand: Sartorius Lab InstrumentsAvailable in 17 variantsThe standard glass fibre pre-filter, placed directly on top of the membrane filter. With acrylic latex binder (4% to 6%, determined by ashing).TypeA: standard glass fiber filterB: extra thick glass fiber filterC: binder-free glass fiber filter
€121,00
Pressure filter holder, stainless steel | Type: Pressure filter holder
Pressure filter holder, stainless steel | Type: Pressure filter holder
Brand: Sartorius Stedim Biotech GmbHFor 142 mm diameter membrane filters. With large capacity barrel allowing up to 2 litres of liquid to be filtered by connection to a suitable direct pressure source. For preparing sludge or separating suspended matter from waste water samples, or sterile filtration of liquids that are difficult to filter, e.g. serum. Filtration surface area: 130 cm². Maximum pressure 7 bar. The holder is supplied complete with a back pressure screen.
€4.920,00
Pressure filter holder, stainless steel | Volume ml: 200, Filter size mm: Ø 47 mm
Pressure filter holder, stainless steel | Volume ml: 200, Filter size mm: Ø 47 mm
Brand: Sartorius Lab InstrumentsFor 47mm diameter membrane filters. With reservoir barrel allowing up to 200ml of liquid to be filtered by connection to a suitable direct pressure source. Can also be used for filtering larger volumes in conjunction with a 5L pressurising container. Complete with silicone O-rings and 10mm diameter tubing ferrules on the inlet and outlets. For sterile filtration of tissue cultures, ultrafiltration of buffer solutions, cell count solutions and for pressing soil samples.
€1.130,00
Pressure filtration units Sartolab® P20 / plus, SFCA, PES | Type: Sartolab® P20, Membrane / housing: PES / PC, Pore size µm: 0.2
Pressure filtration units Sartolab® P20 / plus, SFCA, PES | Type: Sartolab® P20, Membrane / housing: PES / PC, Pore size µm: 0.2
Brand: Sartorius Lab InstrumentsAvailable in 3 variantsSartolab® P20: for sterile filtration of cell culture media. Ready-to-use, disposable filtration units. Surfactant-free, 0.2µm cellulose acetate membrane (SFCA) with minimal protein adsorption. With Luer lock inlet and filling bell on the outlet.Sartolab® P20 plus: with additional, binding agent-free, glass-fibre (GF) pre-filter for media which are difficult to filter.
€118,00

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.