Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

Buddeberg GmbH
456789
Food oil 500 ml according to FDA 4026446009557
Food oil 500 ml according to FDA 4026446009557
€38,20
Glass stirrer coupling flexible K15
Glass stirrer coupling flexible K15
€90,00
Heating bath liquid, BUDDE | Container: 5 litres
Heating bath liquid, BUDDE | Container: 5 litres
Brand: Buddeberg GmbHUse:BUDDE heating bath liquid can be used continuously as a heating medium up to approx. 170 °C. Higher temperatures (below flash point) are possible, but will result in rapid darkening. The low pour point allows the bath liquid also to be used as a cooling medium. Mixtures with 10 % to 30 % water achieve best results.The crucial advantages of BUDDE heating bath liquid compared tothe oils or other organic liquid mainly used are:accidental spillage of water into the bath does not lead to dangerous spitting at temperatures over 100 °C, as the water dissolves in the heating bath liquid and subsequently evaporates safelyBUDDE heating bath liquid can easily be rinsed away with water which eases cleaning of laboratory equipment, e.g. distillation flasks, and also bench or floor if the bath liquid is accidentally spilled.BUDDE heating bath liquid does not foam when mixed with water.Viscosity on addition of water:BUDDE heating bath liquid is quite viscous at ambient or low temperatures, and therefore sometimes difficult to dispense. The addition of 10-20 % water reduces the viscosity and enables easier handling. If the mixture is then heated to 100 °C, the water evaporates without boiling. Further heating is only shortly delayed by this. Before next heating, water can be added again.Water solubility: BUDDE heating bath liquid can be mixed with water in any ratio. The hardness of the water has no effect on the bath liquid.
€189,00
Laboratory safety shield, Makrolon® | Description: safety shield, Width mm: 660, Height mm: 700
Laboratory safety shield, Makrolon® | Description: safety shield, Width mm: 660, Height mm: 700
Brand: Buddeberg GmbHwith impact-resistant Makrolon® panelsmounted in a metal frame with stable feet to provide a secure standcentre panel adjustable to four heightswith folding side panels (W:220mm)full opening possible up to 950mm wideMakrolon® panels 6mm thick
€1.325,00
Magnetic stirrer couplings with ground joint | Type: BUK K20 S1, Joint size NS: 29/32, Volume ml: 500
Magnetic stirrer couplings with ground joint | Type: BUK K20 S1, Joint size NS: 29/32, Volume ml: 500
Brand: Buddeberg GmbHAvailable in 3 variantsStirrer head with a permanent magnetic coupling for mixing applications under vacuum. No straight-through shaft, no shaft sealing rings required as the torque is provided contactless by magnetic force.Speed: 2500 rpmMaterial: 1.4435 (AISI 316L)Seal: FKMBearing: Ball bearing made of stainless steelDrive shaft supplied with 6 mm external square stub.
€3.675,00
Magnetic stirrer couplings with ground joint | Type: BUK K40 S1, Joint size NS: 29/32, Volume ml: 1000
Magnetic stirrer couplings with ground joint | Type: BUK K40 S1, Joint size NS: 29/32, Volume ml: 1000
Brand: Buddeberg GmbHAvailable in 3 variantsStirrer head with a permanent magnetic coupling for mixing applications under vacuum. No straight-through shaft, no shaft sealing rings required as the torque is provided contactless by magnetic force.Speed: 2500 rpmMaterial: 1.4435 (AISI 316L)Seal: FKMBearing: Ball bearing made of stainless steelDrive shaft supplied with 6 mm external square stub.
€2.650,00
Magnetic stirrer couplings with ground joint | Type: BUK K60 S1, Joint size NS: 29/32, Volume ml: 3000
Magnetic stirrer couplings with ground joint | Type: BUK K60 S1, Joint size NS: 29/32, Volume ml: 3000
Brand: Buddeberg GmbHAvailable in 3 variantsStirrer head with a permanent magnetic coupling for mixing applications under vacuum. No straight-through shaft, no shaft sealing rings required as the torque is provided contactless by magnetic force.Speed: 2500 rpmMaterial: 1.4435 (AISI 316L)Seal: FKMBearing: Ball bearing made of stainless steelDrive shaft supplied with 6 mm external square stub.
€4.396,00
Magnetic stirrer couplings with ground joint | Type: BUK K60 S2, Joint size NS: 45/40, Volume ml: 5000
Magnetic stirrer couplings with ground joint | Type: BUK K60 S2, Joint size NS: 45/40, Volume ml: 5000
Brand: Buddeberg GmbHAvailable in 3 variantsStirrer head with a permanent magnetic coupling for mixing applications under vacuum. No straight-through shaft, no shaft sealing rings required as the torque is provided contactless by magnetic force.Speed: 2500 rpmMaterial: 1.4435 (AISI 316L)Seal: FKMBearing: Ball bearing made of stainless steelDrive shaft supplied with 6 mm external square stub.
€5.513,20
Magnetic stirrer couplings with ground joint | Type: BUK K90 S1, Joint size NS: 29/32, Volume ml: 5000
Magnetic stirrer couplings with ground joint | Type: BUK K90 S1, Joint size NS: 29/32, Volume ml: 5000
Brand: Buddeberg GmbHAvailable in 3 variantsStirrer head with a permanent magnetic coupling for mixing applications under vacuum. No straight-through shaft, no shaft sealing rings required as the torque is provided contactless by magnetic force.Speed: 2500 rpmMaterial: 1.4435 (AISI 316L)Seal: FKMBearing: Ball bearing made of stainless steelDrive shaft supplied with 6 mm external square stub.
€2.500,00
Material certificate EN 10204/3.1
Material certificate EN 10204/3.1
€21,00
Pharma- Food Stirrer PLM 38/260
Pharma- Food Stirrer PLM 38/260
€1.988,80
Plate support PS 1 210x315x1000 mm, bar 14 mm Ø
Plate support PS 1 210x315x1000 mm, bar 14 mm Ø
€176,60
456789

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.