Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

747576777879
Sample filtration in trace analysis | Description: Aquatron 30/0.45 CA, Housing: A
Sample filtration in trace analysis | Description: Aquatron 30/0.45 CA, Housing: A
Brand: Cytiva Europe GmbHAvailable in 2 variantsApplications:Filtration of aqueous samples with the regulation of COD, TOC, DOC.Properties:Low blank value, due to pre-rinsed, hydrophilic cellulose acetate membrane.
€1.332,00
Screw caps for screwthread tubes, PBT | Thread GL: 14, Bore mm: 9.5
Screw caps for screwthread tubes, PBT | Thread GL: 14, Bore mm: 9.5
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 5 variantsRed. With DIN thread (GL) and aperture. temperature resistant up to 180°C.
€2,11
Screw caps for screwthread tubes, PBT | Thread GL: 18
Screw caps for screwthread tubes, PBT | Thread GL: 18
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 5 variantsRed. With DIN thread (GL), temperature resistant up to 180 °C, with PTFE coated silicone sealing (VMQ).
€3,40
Screw connector caps, PBT | Thread GL: 14, Bore mm: 9.5
Screw connector caps, PBT | Thread GL: 14, Bore mm: 9.5
Brand: DWK Life Sciences GmbH (Duran)Available in 5 variantsRed. With central hole (diameter outlined below). Temperature resistance to max. 180°C.
€1,82
Screwthread couplings, PBT | Thread GL: 14
Screwthread couplings, PBT | Thread GL: 14
Brand: DWK Life Sciences GmbH (Duran)Available in 5 variantsDIN screwthread. For flexible connection of two glass screwthreads. With integral PTFE-faced silicone (VMQ) seals. Temperature resistant to max. 180°C.
€22,05
Screwthread tubes for glassblowers, DURAN® | Thread GL: 25, Length mm: 100, Ø mm: 22
Screwthread tubes for glassblowers, DURAN® | Thread GL: 25, Length mm: 100, Ø mm: 22
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 5 variantsAcc. to DIN 12216 and in addition to standard (*), with DIN thread (GL), material: DURAN®.
€3,70
Screwthread tubes with NS cone, DURAN® tubing, cap and sealing | Thread GL: 18, Cone NS: 19/26, For diam. mm: 7,5 ... 9
Screwthread tubes with NS cone, DURAN® tubing, cap and sealing | Thread GL: 18, Cone NS: 19/26, For diam. mm: 7,5 ... 9
Brand: Lenz-Laborglas GmbH & Co. KGAvailable in 9 variantsScrew thread adapters , made of DURAN® tubing, with screw-cap with aperture and silicone sealing ring with PTFE washers.
€22,06
Scrubber Adapter for Bottles, PTFE | Thread: GL45, Tube length mm: 300
Scrubber Adapter for Bottles, PTFE | Thread: GL45, Tube length mm: 300
Brand: Bohlender GmbHAvailable in 2 variantsConsisting of PTFE body with connecting nut and two lateral GL18 threaded necks, a 300mm long FEP inlet tube and a gas distributor with frit. Easy in- and outlet of gas by means of rigid-walled tubing (e.g. PTFE) which can be connected to the threaded necks using Bola Laboratory Screw Joints. Elastic tubing can be connected by means of hose connectors. Inlet tube can be individually shortened. Special feature: the body of the adapter can be turned independently from the connecting nut. This means, that the completely assembled adaptor can be removed and fixed onto another bottle without the risk of disarranging the tubing. Suitable for bottles with GL45 or GLS80 threads and capacities between 100ml and 5000ml.
€138,93
Scrubber Bottles Vitrum, borosilicate glass/PTFE | Capacity ml: 500, Height mm: 207, Bottle thread: GL 45
Scrubber Bottles Vitrum, borosilicate glass/PTFE | Capacity ml: 500, Height mm: 207, Bottle thread: GL 45
Brand: Bohlender GmbHAvailable in 4 variantsConsisting of PTFE body with screw cap and two lateral GL 18 threaded necks, suitable borosilicate glass bottle as well as a FEP inlet tube and a gas distributor with finest bores. Easy inlet and outlet of gas by means of hard-walled tubing (e. g. PTFE) which can be connected to the threaded necks with BOLA Laboratory Screw Joints. Elastic tubing can be connected by means of hose connectors. The special feature - the body of the distributor can be turned independently from the screw cap, thus the completely assembled distributor can be removed and fixed onto another bottle without the risk of disarranging the tubing. Suitable for Vacuum.
€132,47
Seal for flat flange vessel | Description: Seal for flat flange vessel DN 50 consist of: PTFE supporting ring and seal O-Ring, Silicone
Seal for flat flange vessel | Description: Seal for flat flange vessel DN 50 consist of: PTFE supporting ring and seal O-Ring, Silicone
Brand: H W S Hans W. SchmidtAvailable in 18 variants
€38,10
Sealing cap assemblies Nalgene™, PP | For tubes ml: 50, Screw cap diam. mm: 24
Sealing cap assemblies Nalgene™, PP | For tubes ml: 50, Screw cap diam. mm: 24
Brand: Thermo Elect.LED GmbH (Nalge)Available in 3 variantsPP screw cap with Tefzel® ETFE plug liner and viton O-ring. Leak-proof at recommended maximum speed and rcf for tubes. Suitable for working with aggressive chemicals. The 38mm assembly has a PP shoulder reinforcement ring to prevent collapsing of the 250ml bottles.
€36,70
Sealing cap assemblies with silicone seal Nalgene™, PP | For tubes ml: 50, Screw cap diam. mm: 24
Sealing cap assemblies with silicone seal Nalgene™, PP | For tubes ml: 50, Screw cap diam. mm: 24
Brand: Thermo Elect.LED GmbH (Nalge)Available in 4 variantsFor Oak Ridge centrifuge test tubes made of PP, PC and polysulphone.
€31,70
747576777879

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.