Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

5678910
Sensors behrotest® for canisters with screw-on closures | Type : FS005, Material : PVC, Length mm : 650
Sensors behrotest® for canisters with screw-on closures | Type : FS005, Material : PVC, Length mm : 650
Brand: Behr Labor-Technik GmbHAvailable in 10 variantsSensors for monitoring the maximum fill heightSensors for monitoring the maximum fill height are used to protect against damage from overflowing vessels.A float assembly encloses a reed contact which activates an acoustic alarm when the maximum fill height is reached, enabling the user to stop further filling in time to prevent overflow.Sensors for monitoring the minimum fill heightSensors for monitoring the minimum fill height are used to protect against interruption in supply or inadequate volume available in processes requiring continuous withdrawal of a liquid from a container.They give an acoustic warning when the content of the container runs low. The sensors are available in various lengths to permit use in containers of different heights. When the liquid level in the container sinks below the set point, a float drops, opening a reed contact. An alarm warning then informs the user of the imminent risk of an empty reservoir.
€211,90
Single-channel Pump Heads SP quick for Pump drives Hei-FLOW | Type: SP quick, Tubing wall thickness: 1.6, Flow rate ml/min.: 0.38 ... 3436
Single-channel Pump Heads SP quick for Pump drives Hei-FLOW | Type: SP quick, Tubing wall thickness: 1.6, Flow rate ml/min.: 0.38 ... 3436
Brand: Heidolph InstrumentsAvailable in 2 variantsFast and convenient tube changesLow pulsation due to 5 roller systemPump head features ball bearingsRollers made of stainless steelFor tubes with a 1.6mm or 2.5mm wall thickness (wt)Depending on drive and tubing, the flow rate ranges from 0.38 to 3436 ml per minute
€558,00
Single-channel Pump Heads SP standard and SP vario for Pump drives Hei-FLOW | Type: SP standard, Tubing wall thickness: 2.5, Flow rate ml/min.: 0.5 ... 3644
Single-channel Pump Heads SP standard and SP vario for Pump drives Hei-FLOW | Type: SP standard, Tubing wall thickness: 2.5, Flow rate ml/min.: 0.5 ... 3644
Brand: Heidolph InstrumentsAvailable in 3 variantsSP standardRecommended for standard applicationsConvex rollers do not squeeze or crush organic cell culturesPump head features ball bearingsRollers made of stainless steel and polyamideFor tubes with a 1.6mm or 2.5mm wall thickness (wt)Depending on drive and tubing, the flow rate ranges from 2.0 to 4151 ml per minuteSP varioSuitable for most Heidolph tubing due to adjustable roller spacingConvex rollers do not squeeze or crush organic cell culturesPump head features ball bearingsRollers made of stainless steel and aluminumDepending on drive and tubing, the flow rate ranges from 2.0 to 4151 ml per minute
€445,00
Single-channel pumpheads for BVP-Standard (-Process) and MCP-Standard (-Process) peristaltic pump drive units | Pumphead type : 380 AD**, Flow rate ml / min. : 0.41 - 3600, Inputs : 1
Single-channel pumpheads for BVP-Standard (-Process) and MCP-Standard (-Process) peristaltic pump drive units | Pumphead type : 380 AD**, Flow rate ml / min. : 0.41 - 3600, Inputs : 1
Brand: Cole-Parmer GmbH (Ismatec)Available in 5 variantsFor tubing with max. wall thickness: 1.6mm
€2.570,00
Siphons | Ø mm: 15, Immersion depth mm: 1000, Flow rate l / min.: 9
Siphons | Ø mm: 15, Immersion depth mm: 1000, Flow rate l / min.: 9
Brand: Bürkle GmbHTransparent with stopcock. Simple to use, suitable for occasional dispensing of non-aggressive liquids from a higher drum to a lower vessel, following the siphoning principle.
€59,90
Solvent pump foot operated | Description: Foot pump with flexible tubing, Immersion depth mm: 950, Flow rate l / min.: 30
Solvent pump foot operated | Description: Foot pump with flexible tubing, Immersion depth mm: 950, Flow rate l / min.: 30
Brand: Bürkle GmbHAvailable in 2 variantsFor filling off high purity liquids such as solvents. Due to the barrel screw joint and the stopcock, the container and the pump can be hermetically sealed. Electrostatic charge can be dissipated through the accessory antistatic set (please order seperately).Medium-contacting parts made opf stainless steel (1.4301) and PTFEFor barrels up to 220 litres, immersion tube can be steplessly adjusted to the barrel depthSuitable for steel barrels with R 2'' thread
€746,35
Solvent pump hand operated | Description: Hand pump ball for solvent pump
Solvent pump hand operated | Description: Hand pump ball for solvent pump
Brand: Bürkle GmbHAvailable in 3 variantsFor contamination-free removal of organic solvents and flavouring agents. Can be completely closed off with two ball valves so that no dangerous vapours can escape after dispensing. Electrostatic charge can be dissipated through the accessory antistatic set (please order separately).Medium-contacting parts are made of stainless steel (1.4301) and PTFEFor containers up to 60 litresSuitable for containers with R 2'' threadThe solvent pump for tinfoil canisters has a connector thread for pull-out spouts
€93,55
Thread adapter
Thread adapter
Brand: Bürkle GmbHFor pumps, drain cocks or other connections.Seal made of ePTFEElectrically conductiveSuitable for flammable liquidsAutoclavableFood safe
€76,40
Thread adapter set | Type: Thread adapter set complete
Thread adapter set | Type: Thread adapter set complete
Brand: Bürkle GmbHThread adapter set consisting of:3/4'' Hünersdorff3/4" Kautex3/4" cylindrical R 3/4" barrel thread3/4" conical R 3/4" barrel threadHex wrench for threaded adapter
€22,95
Thread Adapters LaboPlast® 3/4" | Type: Hünersdorff, Colour: red, Material: PP
Thread Adapters LaboPlast® 3/4" | Type: Hünersdorff, Colour: red, Material: PP
Brand: Bürkle GmbHAvailable in 6 variantsFor StopCock spigots and ball valves.
€6,60
Thread Adapters | Description: Adapter for ball valve, fine thread 2" outer, 3/4" inner
Thread Adapters | Description: Adapter for ball valve, fine thread 2" outer, 3/4" inner
Brand: Bürkle GmbHAvailable in 2 variantsFor ball valves.
€9,10
Thread Adapters, PP | Thread outside: 2" coarse Mauser - 64 mm (BSI)
Thread Adapters, PP | Thread outside: 2" coarse Mauser - 64 mm (BSI)
Brand: Bürkle GmbHAvailable in 21 variantsFor Bürkle pumps and discharge stopcocks.
€15,70
5678910

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.