Accessories
Analytical balances
Moisture balances
Other balances
Pocket balances
Precision balances
Weights
Analytical balances
Moisture balances
Other balances
Pocket balances
Precision balances
Weights
Buffer solutions
Electrode accessories
Ion selective Electrodes
Paper, chopstick
pH-Electrodes
Portable devices
Redox-Electrodes
Table devices
Electrode accessories
Ion selective Electrodes
Paper, chopstick
pH-Electrodes
Portable devices
Redox-Electrodes
Table devices
Overalls, coats, jackets, trousers
Overshoes, overboots, socks
Surgical masks, beard covers, hoods, sleeves
Overshoes, overboots, socks
Surgical masks, beard covers, hoods, sleeves
Chairs and stools
Gowing benches
Mats and floor coverings
Tables, shelves, trolleys, dispensers
Wardrobes
Gowing benches
Mats and floor coverings
Tables, shelves, trolleys, dispensers
Wardrobes
Components for Extraction
Components for reaction and distillation
Distillation-Accessories
Dropping Funnels
Flasks with NS joint neck
Flat ground flange reaction vessels
Gas wash bottles
Ground joints, attachable
KPG stirrer and bearings
Laboratory reactors
NS joints accessories
Reflux condenser
Standard ground stoppers
Stopcocks and Valves
Tubing adapters
Components for reaction and distillation
Distillation-Accessories
Dropping Funnels
Flasks with NS joint neck
Flat ground flange reaction vessels
Gas wash bottles
Ground joints, attachable
KPG stirrer and bearings
Laboratory reactors
NS joints accessories
Reflux condenser
Standard ground stoppers
Stopcocks and Valves
Tubing adapters
Biobanking
Cryogenic accessories
Cryogenic boxes
Cryogenic racks
Cryogenic storage tanks
Cryogenic tubes
Dewar flasks
Ice machines
Liquid nitrogen-Accessories
Low and Ultra low temperature freezers
Refrigerators and Freezers
Refrigerators and Freezers ex protected
Transport boxes
Cryogenic accessories
Cryogenic boxes
Cryogenic racks
Cryogenic storage tanks
Cryogenic tubes
Dewar flasks
Ice machines
Liquid nitrogen-Accessories
Low and Ultra low temperature freezers
Refrigerators and Freezers
Refrigerators and Freezers ex protected
Transport boxes
Concentration
DNA and RNA isolation
DNA-Electrophoresis
Electroporation
Gel-Documentation
PCR
PCR cabinets
Thermocyclers
DNA and RNA isolation
DNA-Electrophoresis
Electroporation
Gel-Documentation
PCR
PCR cabinets
Thermocyclers
Accessories and reagents
Dissecting sets
Embedding cassettes
Microtoms
Scalpels
Tissue floating baths
Dissecting sets
Embedding cassettes
Microtoms
Scalpels
Tissue floating baths
Cold light sources
Counting chambers
Digital microscopes and cameras
Light microscopes
Microscopy accessories
Slide covers
Slide storage
Slides
Staining racks
Stereomicroscopes
Counting chambers
Digital microscopes and cameras
Light microscopes
Microscopy accessories
Slide covers
Slide storage
Slides
Staining racks
Stereomicroscopes
- 3M Deutschland GmbH
- Amarell GmbH & Co KG
- As One Corporation
- Behr Labor-Technik GmbH
- Bel-Art Products
- BRAND GMBH + CO.KG
- Bürkle GmbH
- Epredia Netherlands BV
- Heathrow Scientific LLC
- interscience
- ISOLAB Laborgeräte GmbH
- Kartell S.p.A.
- Lenz-Laborglas GmbH & Co. KG
- LLG Labware
- Ludwig Schneider GmbH & Co.KG
- Nasco Sampling LLC
- Ritter GmbH
- RSG Rostfrei-Schneidwerkzeuge
- Saint Gobain
- Sterilin Ltd.
- Thermo Elect.LED GmbH (Nalge)
- Thermo Elect.LED GmbH (Nunc)
- VITLAB GmbH
- Wilhelm Schröder GmbH & Co.KG
- Windaus-Labortechnik
Core sampler, Stainless steel AISI 316 | Length mm: 200, Ø mm: 15, Nominal capacity ml: 15
Brand: Bürkle GmbHAvailable in 3 variantsThe core sampler can be used to take samples of bulk materials which can easily become stuck or settle during sampling due to their particle form. In comparison to standard all-layer samplers for bulk materials, the two-part core sampler has no gap dimensions in which the medium can become stuck while it is being removed. This makes it possible to take a proper sample of powders and granulates through multiple layers, for example glass balls or metal powders. Depending on the size, the stainless steel sampler can be used for a wide range of different containers, for example big bags or small containers. The bulk material sampler takes a representative core sample and is ideal for use in various laboratory and industrialapplications.Scope of supply: Core sampler (consisting of boring rod and boring tube), fixing clipCore sampler, Stainless steel AISI 316 | Length mm: 200, Ø mm: 15, Nominal capacity ml: 15
€528,80
Core sampler, Stainless steel AISI 316 | Length mm: 400, Ø mm: 25, Nominal capacity ml: 110
Brand: Bürkle GmbHAvailable in 3 variantsThe core sampler can be used to take samples of bulk materials which can easily become stuck or settle during sampling due to their particle form. In comparison to standard all-layer samplers for bulk materials, the two-part core sampler has no gap dimensions in which the medium can become stuck while it is being removed. This makes it possible to take a proper sample of powders and granulates through multiple layers, for example glass balls or metal powders. Depending on the size, the stainless steel sampler can be used for a wide range of different containers, for example big bags or small containers. The bulk material sampler takes a representative core sample and is ideal for use in various laboratory and industrialapplications.Scope of supply: Core sampler (consisting of boring rod and boring tube), fixing clipCore sampler, Stainless steel AISI 316 | Length mm: 400, Ø mm: 25, Nominal capacity ml: 110
€575,15
Core sampler, Stainless steel AISI 316 | Length mm: 800, Ø mm: 25, Nominal capacity ml: 230
Brand: Bürkle GmbHAvailable in 3 variantsThe core sampler can be used to take samples of bulk materials which can easily become stuck or settle during sampling due to their particle form. In comparison to standard all-layer samplers for bulk materials, the two-part core sampler has no gap dimensions in which the medium can become stuck while it is being removed. This makes it possible to take a proper sample of powders and granulates through multiple layers, for example glass balls or metal powders. Depending on the size, the stainless steel sampler can be used for a wide range of different containers, for example big bags or small containers. The bulk material sampler takes a representative core sample and is ideal for use in various laboratory and industrialapplications.Scope of supply: Core sampler (consisting of boring rod and boring tube), fixing clipCore sampler, Stainless steel AISI 316 | Length mm: 800, Ø mm: 25, Nominal capacity ml: 230
€623,90
Depth stop for samplers | Ø: 150 mm, For ext. Ø: 25 mm, Material: Stainless steel 1.4404
Brand: Bürkle GmbHAvailable in 2 variantsThe depth stop can be clamped to any height of the sampler. This ensures that the sampler penetrates to the same desired depth each time it is pierced. In addition, accidental puncturing during sampling is prevented.For standardised, reproducible samplingFixation by C-clamping screwAutoclavableFood safeDepth stop for samplers | Ø: 150 mm, For ext. Ø: 25 mm, Material: Stainless steel 1.4404
€162,55
Depth stop for samplers | Ø: 250 mm, For ext. Ø: 50 mm, Material: Aluminium/Stainless steel 1.4301
Brand: Bürkle GmbHAvailable in 2 variantsThe depth stop can be clamped to any height of the sampler. This ensures that the sampler penetrates to the same desired depth each time it is pierced. In addition, accidental puncturing during sampling is prevented.For standardised, reproducible samplingFixation by C-clamping screwAutoclavableFood safeDepth stop for samplers | Ø: 250 mm, For ext. Ø: 50 mm, Material: Aluminium/Stainless steel 1.4301
€204,10
Dip samplers, PP | Volume ml: 140, Immersion depth: 500 mm, Ø mm: 25
Brand: Bürkle GmbHAvailable in 3 variantsFor simple removal of liquid samples.Good view due to transparent tubesUpper end with reflux valve, lower end with ball valveAll-layer and point sampling possible500 ml dip sampler stepless extendableDip samplers, PP | Volume ml: 140, Immersion depth: 500 mm, Ø mm: 25
€52,65
Dip samplers, PP | Volume ml: 280, Immersion depth: 1000 mm, Ø mm: 25
Brand: Bürkle GmbHAvailable in 3 variantsFor simple removal of liquid samples.Good view due to transparent tubesUpper end with reflux valve, lower end with ball valveAll-layer and point sampling possible500 ml dip sampler stepless extendableDip samplers, PP | Volume ml: 280, Immersion depth: 1000 mm, Ø mm: 25
€56,45
Dip samplers, PP | Volume ml: 500, Immersion depth: 1000 - 2000 mm, Ø mm: 25
Brand: Bürkle GmbHAvailable in 3 variantsFor simple removal of liquid samples.Good view due to transparent tubesUpper end with reflux valve, lower end with ball valveAll-layer and point sampling possible500 ml dip sampler stepless extendableDip samplers, PP | Volume ml: 500, Immersion depth: 1000 - 2000 mm, Ø mm: 25
€67,80
Dipping vessels for sampling
Brand: Bürkle GmbHAvailable in 7 variantsAccording to DIN 51750 pt. 2Dipping VesselFor sampling liquids from tanks, lorry tankers, etc. Made of brass or stainless steel AISI 304 (1.4301) for Ex areas. 1 L capacity, 82 mm diameter, 427 mm height with handle. Without lowering cable.Operation: When the dipping vessel is lowered, the liquid constantly runs through it. By pulling back, both valves close automatically.Emptying at the top via the open flaps.Dipping bottle EXFor sampling flammable liquids.For sampling category A mineral oil products, Explosion Categories IIA, IIB and IIC. Made from brass that do not produce sparks, 89 mm diameter, 443 mm height with handle, weight 3.3 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain.Dipping bottle glassFor sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000 ml capacity, 148 mm diameter, 330 mm high, weight 3.2 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.Immersion CylindersFor target spot and bottom samples of mineral oil products. Made of nickel-plated brass. Heavy, robust design (4.3 kg). Without lowering and pull cablesTarget spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.Target immersion cylinderWith the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. Weight 2.6 kg. With 5 m venting tube. Screw off top enables easy cleaning.Mini immersion cylinderFor sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Capacity 50 ml, 32 mm diameter, height 180 mm, weight 330 g. Without lowering cable. Upper body unscrews for easy cleaning.Dipping vessels for sampling
€615,15
Dipping vessels for sampling | Type: Dipping bottle
Brand: Bürkle GmbHAvailable in 7 variantsAccording to DIN 51750 pt. 2Dipping VesselFor sampling liquids from tanks, lorry tankers, etc. Made of brass or stainless steel AISI 304 (1.4301) for Ex areas. 1 L capacity, 82 mm diameter, 427 mm height with handle. Without lowering cable.Operation: When the dipping vessel is lowered, the liquid constantly runs through it. By pulling back, both valves close automatically.Emptying at the top via the open flaps.Dipping bottle EXFor sampling flammable liquids.For sampling category A mineral oil products, Explosion Categories IIA, IIB and IIC. Made from brass that do not produce sparks, 89 mm diameter, 443 mm height with handle, weight 3.3 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain.Dipping bottle glassFor sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000 ml capacity, 148 mm diameter, 330 mm high, weight 3.2 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.Immersion CylindersFor target spot and bottom samples of mineral oil products. Made of nickel-plated brass. Heavy, robust design (4.3 kg). Without lowering and pull cablesTarget spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.Target immersion cylinderWith the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. Weight 2.6 kg. With 5 m venting tube. Screw off top enables easy cleaning.Mini immersion cylinderFor sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Capacity 50 ml, 32 mm diameter, height 180 mm, weight 330 g. Without lowering cable. Upper body unscrews for easy cleaning.Dipping vessels for sampling | Type: Dipping bottle
€553,50
Dipping vessels for sampling | Type: Dipping bottles Ex
Brand: Bürkle GmbHAvailable in 7 variantsAccording to DIN 51750 pt. 2Dipping VesselFor sampling liquids from tanks, lorry tankers, etc. Made of brass or stainless steel AISI 304 (1.4301) for Ex areas. 1 L capacity, 82 mm diameter, 427 mm height with handle. Without lowering cable.Operation: When the dipping vessel is lowered, the liquid constantly runs through it. By pulling back, both valves close automatically.Emptying at the top via the open flaps.Dipping bottle EXFor sampling flammable liquids.For sampling category A mineral oil products, Explosion Categories IIA, IIB and IIC. Made from brass that do not produce sparks, 89 mm diameter, 443 mm height with handle, weight 3.3 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain.Dipping bottle glassFor sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000 ml capacity, 148 mm diameter, 330 mm high, weight 3.2 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.Immersion CylindersFor target spot and bottom samples of mineral oil products. Made of nickel-plated brass. Heavy, robust design (4.3 kg). Without lowering and pull cablesTarget spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.Target immersion cylinderWith the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. Weight 2.6 kg. With 5 m venting tube. Screw off top enables easy cleaning.Mini immersion cylinderFor sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Capacity 50 ml, 32 mm diameter, height 180 mm, weight 330 g. Without lowering cable. Upper body unscrews for easy cleaning.Dipping vessels for sampling | Type: Dipping bottles Ex
€565,30
Dipping vessels for sampling | Type: Dipping vessel, stainless steel V2A
Brand: Bürkle GmbHAvailable in 7 variantsAccording to DIN 51750 pt. 2Dipping VesselFor sampling liquids from tanks, lorry tankers, etc. Made of brass or stainless steel AISI 304 (1.4301) for Ex areas. 1 L capacity, 82 mm diameter, 427 mm height with handle. Without lowering cable.Operation: When the dipping vessel is lowered, the liquid constantly runs through it. By pulling back, both valves close automatically.Emptying at the top via the open flaps.Dipping bottle EXFor sampling flammable liquids.For sampling category A mineral oil products, Explosion Categories IIA, IIB and IIC. Made from brass that do not produce sparks, 89 mm diameter, 443 mm height with handle, weight 3.3 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain.Dipping bottle glassFor sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000 ml capacity, 148 mm diameter, 330 mm high, weight 3.2 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.Immersion CylindersFor target spot and bottom samples of mineral oil products. Made of nickel-plated brass. Heavy, robust design (4.3 kg). Without lowering and pull cablesTarget spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.Target immersion cylinderWith the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. Weight 2.6 kg. With 5 m venting tube. Screw off top enables easy cleaning.Mini immersion cylinderFor sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Capacity 50 ml, 32 mm diameter, height 180 mm, weight 330 g. Without lowering cable. Upper body unscrews for easy cleaning.Dipping vessels for sampling | Type: Dipping vessel, stainless steel V2A
€1.210,00
Copyright © 2024 - Achrom nv - BE 0445.025.508 | General terms | Cookiebeleid | Privacybeleid | Handcrafted by CrayonCru®