Please wait

Your message is being sent

An error occurred

Analytical measurement and testing

Chromatography

Cleaning and sterilisation

Cleanroom

Distillation, separation, filtration

Environmental-, soil-, water-, food analysis

General laboratory consumables

Heating and cooling technology

Life sciences

Liquid handling

Occupational safety, security

Optical instruments and microscopes

Sample preparation

Stirring, shaking, mixing

Vacuum technology, drying, dry storage

Bürkle GmbH
456789
Dipping vessels for sampling | Type: Immersion cylinder
Dipping vessels for sampling | Type: Immersion cylinder
Brand: Bürkle GmbHAvailable in 7 variantsAccording to DIN 51750 pt. 2Dipping VesselFor sampling liquids from tanks, lorry tankers, etc. Made of brass or stainless steel AISI 304 (1.4301) for Ex areas. 1 L capacity, 82 mm diameter, 427 mm height with handle. Without lowering cable.Operation: When the dipping vessel is lowered, the liquid constantly runs through it. By pulling back, both valves close automatically.Emptying at the top via the open flaps.Dipping bottle EXFor sampling flammable liquids.For sampling category A mineral oil products, Explosion Categories IIA, IIB and IIC. Made from brass that do not produce sparks, 89 mm diameter, 443 mm height with handle, weight 3.3 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain.Dipping bottle glassFor sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000 ml capacity, 148 mm diameter, 330 mm high, weight 3.2 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.Immersion CylindersFor target spot and bottom samples of mineral oil products. Made of nickel-plated brass. Heavy, robust design (4.3 kg). Without lowering and pull cablesTarget spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.Target immersion cylinderWith the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. Weight 2.6 kg. With 5 m venting tube. Screw off top enables easy cleaning.Mini immersion cylinderFor sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Capacity 50 ml, 32 mm diameter, height 180 mm, weight 330 g. Without lowering cable. Upper body unscrews for easy cleaning.
€706,75
Dipping vessels for sampling | Type: Mini immersion cylinder
Dipping vessels for sampling | Type: Mini immersion cylinder
Brand: Bürkle GmbHAvailable in 7 variantsAccording to DIN 51750 pt. 2Dipping VesselFor sampling liquids from tanks, lorry tankers, etc. Made of brass or stainless steel AISI 304 (1.4301) for Ex areas. 1 L capacity, 82 mm diameter, 427 mm height with handle. Without lowering cable.Operation: When the dipping vessel is lowered, the liquid constantly runs through it. By pulling back, both valves close automatically.Emptying at the top via the open flaps.Dipping bottle EXFor sampling flammable liquids.For sampling category A mineral oil products, Explosion Categories IIA, IIB and IIC. Made from brass that do not produce sparks, 89 mm diameter, 443 mm height with handle, weight 3.3 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain.Dipping bottle glassFor sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000 ml capacity, 148 mm diameter, 330 mm high, weight 3.2 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.Immersion CylindersFor target spot and bottom samples of mineral oil products. Made of nickel-plated brass. Heavy, robust design (4.3 kg). Without lowering and pull cablesTarget spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.Target immersion cylinderWith the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. Weight 2.6 kg. With 5 m venting tube. Screw off top enables easy cleaning.Mini immersion cylinderFor sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Capacity 50 ml, 32 mm diameter, height 180 mm, weight 330 g. Without lowering cable. Upper body unscrews for easy cleaning.
€339,15
Dipping vessels for sampling | Type: Target immersion cylinder
Dipping vessels for sampling | Type: Target immersion cylinder
Brand: Bürkle GmbHAvailable in 7 variantsAccording to DIN 51750 pt. 2Dipping VesselFor sampling liquids from tanks, lorry tankers, etc. Made of brass or stainless steel AISI 304 (1.4301) for Ex areas. 1 L capacity, 82 mm diameter, 427 mm height with handle. Without lowering cable.Operation: When the dipping vessel is lowered, the liquid constantly runs through it. By pulling back, both valves close automatically.Emptying at the top via the open flaps.Dipping bottle EXFor sampling flammable liquids.For sampling category A mineral oil products, Explosion Categories IIA, IIB and IIC. Made from brass that do not produce sparks, 89 mm diameter, 443 mm height with handle, weight 3.3 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull the cable when the target spot has been reached and the stopper opens. 3. Sample flows in. 4. Pull up dipping bottle and remove sample. Use an electrically conductive, manually operated reel and lowering cable or chain.Dipping bottle glassFor sewage disposal plants, sludge and water samples. Nickel-plated brass frame with glass sample bottle. 1000 ml capacity, 148 mm diameter, 330 mm high, weight 3.2 kg. Without lowering cable.Operation: 1. Lower bottle into liquid. 2. Pull cable when target depth is reached and open stopper. 3. Sample flows in. 4. Pull bottle back up and remove sample.Immersion CylindersFor target spot and bottom samples of mineral oil products. Made of nickel-plated brass. Heavy, robust design (4.3 kg). Without lowering and pull cablesTarget spot sample: 1. Immersion cylinder is lowered in the tank to be sampled by the manually operated reel. 2. The separate pull cable is used to open the valve when the target spot is reached and the sample then enters the immersion cylinder.Bottom sample: 1. Lower the immersion cylinder to the bottom. 2. The weight of the immersion cylinder opens the valve automatically when the bottom is reached and the sample then enters the immersion cylinder.Target immersion cylinderWith the Target immersion cylinder, liquid samples can be taken from a particular point. The immersion cylinder is lowered on a strong and sealed tube. When the target has been reached, a valve at the tube end is opened. This vents the immersion cylinder and fills it with the sample. The immersion cylinder is pulled up and emptied via the screw thread. Weight 2.6 kg. With 5 m venting tube. Screw off top enables easy cleaning.Mini immersion cylinderFor sampling liquids in narrow places where access is difficult. Can also be used in curved dipping tubes and barrels with narrow openings. Capacity 50 ml, 32 mm diameter, height 180 mm, weight 330 g. Without lowering cable. Upper body unscrews for easy cleaning.
€490,85
Disposable multi-zone sampler PharmaDispo
Disposable multi-zone sampler PharmaDispo
Brand: Bürkle GmbHAvailable in 10 variantsThe three separate sampling chambers allow simultaneous sampling from different layers or zones. A sliding mechanism with an end stop makes it easy to open and close the sampler. Ergonomic one-handed operationClean room manufactured, individually packagedFood safe
€155,05
Disposable multi-zone sampler PharmaDispo
Disposable multi-zone sampler PharmaDispo
Brand: Bürkle GmbHAvailable in 10 variantsThe three separate sampling chambers allow simultaneous sampling from different layers or zones. A sliding mechanism with an end stop makes it easy to open and close the sampler. Ergonomic one-handed operationClean room manufactured, individually packagedFood safe
€165,10
Disposable multi-zone sampler PharmaDispo
Disposable multi-zone sampler PharmaDispo
Brand: Bürkle GmbHAvailable in 10 variantsThe three separate sampling chambers allow simultaneous sampling from different layers or zones. A sliding mechanism with an end stop makes it easy to open and close the sampler. Ergonomic one-handed operationClean room manufactured, individually packagedFood safe
€165,10
Disposable multi-zone sampler PharmaDispo
Disposable multi-zone sampler PharmaDispo
Brand: Bürkle GmbHAvailable in 10 variantsThe three separate sampling chambers allow simultaneous sampling from different layers or zones. A sliding mechanism with an end stop makes it easy to open and close the sampler. Ergonomic one-handed operationClean room manufactured, individually packagedFood safe
€165,10
Disposable multi-zone sampler PharmaDispo
Disposable multi-zone sampler PharmaDispo
Brand: Bürkle GmbHAvailable in 10 variantsThe three separate sampling chambers allow simultaneous sampling from different layers or zones. A sliding mechanism with an end stop makes it easy to open and close the sampler. Ergonomic one-handed operationClean room manufactured, individually packagedFood safe
€155,05
Disposable multi-zone sampler PharmaDispo
Disposable multi-zone sampler PharmaDispo
Brand: Bürkle GmbHAvailable in 10 variantsThe three separate sampling chambers allow simultaneous sampling from different layers or zones. A sliding mechanism with an end stop makes it easy to open and close the sampler. Ergonomic one-handed operationClean room manufactured, individually packagedFood safe
€155,05
Disposable multi-zone sampler PharmaDispo
Disposable multi-zone sampler PharmaDispo
Brand: Bürkle GmbHAvailable in 10 variantsThe three separate sampling chambers allow simultaneous sampling from different layers or zones. A sliding mechanism with an end stop makes it easy to open and close the sampler. Ergonomic one-handed operationClean room manufactured, individually packagedFood safe
€165,10
Disposable multi-zone sampler PharmaDispo
Disposable multi-zone sampler PharmaDispo
Brand: Bürkle GmbHAvailable in 10 variantsThe three separate sampling chambers allow simultaneous sampling from different layers or zones. A sliding mechanism with an end stop makes it easy to open and close the sampler. Ergonomic one-handed operationClean room manufactured, individually packagedFood safe
€155,05
Disposable multi-zone sampler PharmaDispo
Disposable multi-zone sampler PharmaDispo
Brand: Bürkle GmbHAvailable in 10 variantsThe three separate sampling chambers allow simultaneous sampling from different layers or zones. A sliding mechanism with an end stop makes it easy to open and close the sampler. Ergonomic one-handed operationClean room manufactured, individually packagedFood safe
€165,10
456789

Copyright © 2026 - Achrom nv - BE 0445.025.508    |    General terms    |    Cookiebeleid    |    Privacybeleid    |    Handcrafted by CrayonCru®

Our website uses cookies.
Both we and our third-party partners use cookies. Some are strictly necessary for the site to function, but there are also optional cookies.

Necessary and functional cookies are always on. If you click "accept all cookies", you also accept the optional cookies. You can choose which cookies you want to enable via "set preferences".

Our website uses cookies.
What are cookies? What cookies do we use and why? Read more in our cookie policy

Necessary cookies

Cookies that are indispensable for your visit to the Website and the correct use thereof

Functional cookies

Cookies that make it easier and more pleasant for you to visit the Website, for example by personalising your browsing experience.

Performance cookies

Cookies that collect information about your use of the Website in order to improve the content of the Website and adapt it to the wishes of the User.

Third-party cookies

Cookies placed by third parties who offer their own services via the Website, such as social media, advertisements or video services.